SRM WITH AN EXTERNAL POWER AMP FOR FRONT OF HOUSE SPEAKERS
1.Connect a cord from the Main Out jack to an external power amp. Be sure one monitor enclosure is connected to a PA 1 Out jack and the other is connected to a PA 2 Out jack. (PA 1 power amp can now be assigned to monitor speakers by connecting a small, shielded jumper cable from the Mon Out jack to PA 1 In. Next, connect the PA2 power amp to Monitor Out by placing the PA2 Assign switch to the Mon position. The Monitor control will now adjust volume for both PA 1 and PA 2.)
2.The Main control in the master section adjusts the signal level to your external power amp.
3.Be sure to turn your tape deck, keyboard or other instruments and gear on first, then your SRM 6302 / 8302 and external power amplifier.
13
