Pioneer PDP-S55-LR manual Connecting speaker cords, Cleaning cabinets, Specifications

English

Connecting speaker cords

Note:

Be sure to turn off the power to the monitor before connecting the speakers.

Use the provided speaker cords to connect the R/L speaker jacks of the monitor to the speaker jacks of the speakers.

Once the cords have been connected, pull on the cords lightly to make sure that they have been connected firmly to the speaker jacks. An improper connection might result in the sound being interrupted or the appearance of noise in the output sound.

Cord clampers

Remove the seal from the rear of the cord clampers, attach the clampers in the desired position, and clamp the cords into place.

Note that the speaker cords have positive and negative ends, and that you should be sure to insert them correctly.

Black

Red

Press the button of the speaker jack and keep it pressed down as you insert the wire of the speaker cord and then release the button.

Cleaning cabinets

Note:

Before cleaning, always be sure to remove the power plug from its socket.

¶Wipe with a soft, dry cloth with a relatively flat pile.

If soiling is particularly bad, wet the cloth in a mixture of neutral detergent thinned with water, wring the cloth dry, wipe, and then finish with a dry cloth.

If using a chemically treated cleaning cloth, be sure to follow any and all instructions on its use.

¶Wiping with a mixture containing benzene, paint thinner, or other volatile materials may result in warping or the peeling of the cabinet coating.

¶To remove dust from the speaker mesh protectors, use a vacuum cleaner with a brush adapter.

Note that you should never attempt to clean the speakers by applying a vacuum directly to the speaker mesh protectors or by using nozzle adaptor.

¶Scratching the cabinet or the speaker mesh protectors with a fingernail or the application of force using any other hard object may result in scratching.

Also note that inserting any sharp object into the speaker mesh protectors may result in the opening of holes.

Note:

Never apply insecticide or any other volatile materials on the cabinet. Also avoid leaving any rubber or plastic materials on the cabinet for any extended period of time, as doing so may result in warping or the peeling of the cabinet coating.

Specifications

Description	2-way, 3-speaker system
	(Bass reflex speaker system; Qty: 1)
Impedance	6 Ω
Rated input	20 W
Maximum input	60 W
External dimensions
..............................	90 mm (W) x 880 mm (H) x 96 mm (D)
3-17/32 in. (W) x 34-21/32 in. (H) x 3-25/32 in. (D)
(Not including attachment plates; Qty: 1)
Weight	6.8 kg (15 lbs) (2 speakers)
Usage environment
Temperature	0 °C to 40 °C (32 °F to 104 °F)
Humidity	20 % to 80 %
Storage environment
Temperature	–10 °C to 50 °C (14 °F to 122 °F)
Humidity	10 % to 90 %

¶Specifications and design subject to possible modification without notice, due to improvements.

10