Troubleshooting
• Put the headphones on, and then gradually increase the volume to your desired listening level.
• Do not listen at extremely high volume levels. Extended
• Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume level that does not cause discomfort might still damage your hearing.
6417$.'5*116+0)
| We do not expect you to have any problems with | |
| your amplifier. But if you do, these suggestions | |
mighthelp. | ||
No power.
No sound.
Feedback.
Sound source or speakers not connected properly.
Amplifier’s MASTER
VOLUME, MIC 1, MIC 2, PHONO/AUX, 100 Hz, 1kHz, 8 kHz controls set to minimum.
Sound source or speakers are not connected properly.
A microphone or cable might be faulty.
The speaker’s wires might be the wrong impedance.
The speaker’s wires might be too small.
The amplifier might have shut down.
Microphones or speakers are too close together.
Check all connections.
Adjust the volume control to desired setting.
Check all connections.
Check all microphones and cables.
Make sure all connected speakers have the same impedance rating.
Make sure the speaker’s wires are the correct gauge according to length.
Turn the amplifier off and let it cool. Make sure the amplifier is properly ventilated, and then turn it back on.
Reposition the microphones and speakers.
16