Roberts Radio 32-2054 owner manual 242#4#6+10, #%+06*#/2.++4, #%+06*52#-45, 24566+06*%10641.5

Preparation

%106'065

Preparation	4
Placing the Amplifier	4
Placing the Speakers	4
Presetting the Controls	4
Connections	5
Connecting Input Sources...	5
Connecting the Speakers	7
One Speaker	9
Two Speakers in Series ..	9
Two Speakers in
Parallel	10
Series/Parallel Comb. ...	11
Speakers w/Transform. .	12
Connecting Power	15
Connecting the DC Jack ....	15
Replacing the DC
Power Cord’s Fuse	15
Operation	15
Monitoring Sound	15
Listening Safely	15
Troubleshooting	16
Care	17
Service and Repair	17
Specifications	18
Accessories	19

24'2#4#6+10

2.#%+0)￿6*'￿#/2.+(+'4

Before you use your amplifier, be sure to place it on a location with adequate ventilation. Do not put it on thick carpeting (which can restrict air flow) or near a heat source, such as a heat vent or radiator (which can cause it to overheat).

2.#%+0)￿6*'￿52'#-'45

Speaker placement depends on your room’s size and arrangement. We recommend you play a wide-range recording and experiment with speaker placement until you find the locations that result in the best sound. For the best results, point the speakers in toward the listeners, especially if you place the speakers far apart so their coverage areas overlap to prevent dead spots (areas not covered by the speaker’s sound). Position the speakers slightly above the level of the listeners’ heads and be sure you have determined the correct speaker impedance (see “Connecting the Speakers” on Page 7).

24'5'66+0)￿6*'￿%10641.5

Before you begin making connections or using your amplifier, preset the audio input sources’ and amplifier’s controls to avoid overdriving a channel or producing loud sounds.

4