Shure DFR22 manual Specifications, Furnished Accessories

Page 11

ENGLISH

SPECIFICATIONS

Frequency Response

20 Hz to 20 kHz ±1 dB

Dynamic Range

110 dB minimum, A-weighted, 20 Hz to 20 kHz

Sampling Rate

48 kHz

Digital-to-Analog, Analog-to-Digital Conversion

24bit

Impedance Input: 10 kOutput: 120

Input Clipping Level +24 dBu minimum

Output Clipping Level +24 dBu

+12 dBu (with 12 dB pad)

+6 dBu (with 18 dB pad)

Total Harmonic Distortion

< 0.05%, +4 dBu, 20 Hz to 20 kHz

Propagation Delay from Input to Output <1.5 ms

Polarity

Input to output: non-inverting (inverting optional)

Operating Voltage

100–240 Vac, 50/60 Hz (auto-switching), 1 A, maximum

Maximum Power Drain 45W

Temperature Range

Operating: –7_to 49_ C (19_ to 120_ F)

Storage: –29_to 74_ C (–20_to 165_ F)

Dimensions

482.6mm x 247.7 mm x 44.4 mm (19 in. x 9.75 in. x 1.75 in.)

(See Figure 18)

Weight

2.83kg (6.25 lbs)

Furnished Accessories

Power Cable (DFR22) . . . . . . . . . . . . . . . . . . . . . . . . 95B8389 Power Cable (DFR22E) . . . . . . . . . . . . . . . . . . . . . . . 95C8247 5-pin DIN Shure Link Cable . . . . . . . . . . . . . . . . . . . . 95B8676 Hardware Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90AY8100

12 Block Connector Terminals, 3-pin (for audio inputs and outputs)

2 Block Connector Terminals, 10-pin (for control inputs and outputs)

4 Rackmount Screws and Washers

Optional Accessories

DRS10 Wallplate unit with 10-position rotary switch for preset control

Certifications

cULus. Listed and cUL Listed to UL 6500 and CSA E60065. Au- thorized under Verification provision of FCC Part 15 as a Class B Digital Device.

This Class B digital apparatus complies with Canadian ICES–003.

Conforms to European Union Directives, eligible to bear CE marking. Meets European Union Low Voltage Requirements: Certified to EN 60065. Meets applicable tests and per- formance criteria in European Standard EN55103 (1996) parts 1 and 2, for residential (E1) and commercial and light industrial (E2) environments.

NOTE: EMC conformance testing is based on the use of sup- plied and recommended cable types. The use of other cable types may degrade EMC performance.

EMC conformance testing is based on the fact that the computer is used for setup purposes only and disconnected during EMC testing.

DFR22 DIMENSIONS

Figure 18

9

Image 11
Contents DFR22 Important Safety Instructions Packing List Software InstallationUsing the DFR22 Software DescriptionBack Panel OverviewFront Panel Default Presets Rack Mounting the DFR22 DFR22 Theory Feedback ReductionDFR22 Limitations Initialization Power and InitializationPower Mains Connections Wiring ConnectorsShure Link Network DB and 18 dB Output PadsComputer Connections RS-232 ConnectionsDetermining Control Pin Allocations Preset Control ConnectionsControl PIN Connections Mute Control PIN Connections Mute Control ConnectionsGain Control Connections AMX / Crestron Control ConnectionsFurnished Accessories SpecificationsInformation to User Limited TWO Year Warranty