UR1M Micro Bodypack Transmitter Addendum
Specifications:
Features:
The following specifications apply to the UR1M micro bodypack only.
UR1M
• Same audio performance as UR1
• Rapid
•
• Operates with three types of primary batteries: alkaline, lithium or NiMH
• Audio signal is input through a TA4F connector (UR1M) or a LEMO connector (UR1MLEMO3)
• Selectable battery metering by battery type
• Audio metering on UR1M transmitter
| Frequency Range | |
Band |
| Range |
G1 |
| |
H4, H4E |
| |
J5 |
| |
J5E |
| |
L3, L3E |
| |
Q5 |
| |
Q6 |
| |
Q9 |
| |
Q10A |
| |
R9 |
| |
R16, R18 |
| |
A24 |
| |
|
|
|
JBX |
| |
|
|
|
X1 |
| |
|
|
|
RF Carrier Frequency Range
Working Range
150 m (500 ft.), under typical conditions 500 m (1600 ft.)
NOTE: Actual working range depends on RF signal absorption, reflec- tion and interference
RF Power Output
Selectable 10 mW or 50 mW depending on region
Power Requirements:
Two 1.5V AAA alkaline, lithium primary, and NiMH batteries
Current Drain:
130 mA max. at 3V (normal RF power setting)
200 mA max. at 3V (high RF power setting)
Gain Adjustment Range
Battery Life (Typical):
Alkaline: | 6 hours (normal RF power) |
| 4 hours (high RF power) |
|
|
Lithium primary: | 9 hours (normal RF power) |
| 7 hours (high RF power) |
NiMH 1000 mAH: | 6 hours (normal RF power) |
| 4 hours (high RF power) |
Select Battery Type:
Set the micro bodypack transmitter switch to on
Press enterkey, then scroll using button to select battery type. Press enterkey to confirm.
Note: For the most accurate battery metering and performance, make sure to select the correct battery type.
To open the micro bodypack transmitter, see illustrations below:
Slide arrow down
Transmitter LCD Interface and Controls:
For additional information on the LCD Interface and controls, see
27A12268 (Rev. 3) |
| Printed in U.S.A. |
©2008 Shure Incorporated |
|
|
|
| |
|
|