Shure UHF-R manual Certification, Information to User

Page 39

Overall Dimensions

 

 

UR1M Transmitter Audio Input:

49 mm L x 60 mm W x 17 mm D (1.9 x 2.38 x 0.66 in.)

Connector:

4-Pin male mini connector (TA4M)

Net Weight

 

 

 

 

 

3-Pin female mini connector (LEMO XRB.00.303)

62 g (2.2 oz.) without batteries

 

Input Configuration:

Unbalanced, active

Wiring

 

 

 

 

 

 

TA4F Connector

 

 

Maximum Input Level:

+5 dBu (sensitivity 0 dB)

Microphone Element

TA4F

TA4M

(1 kHz, 1% THD)

+15 dBu (sensitivity –10 dB)

Connector

Connector

 

 

 

TA4M Connector Pin

Pin 1: Ground

 

 

UR1M MIC JACK BOARD

 

 

Assignments:

Pin 2: +5 VDC bias

 

 

 

 

 

 

Pin 3: Audio, 200 kΩ

 

 

 

 

 

 

 

 

Pin 4: Tied through active load (on main board)

 

 

Active Load

 

to ground.

 

 

 

(On instrument adapter cable, Pin 4 floats)

 

 

Audio

 

 

 

LEMO Connector Pin

Pin 1: Ground

 

 

Ground

 

 

Assignments:

Pin 2: +5 VDC bias

NOTE: LAVALIER MIC TIES PINS 3 AND 4 TOGETHER—GUITAR CABLE DOES NOT.

 

Pin 3: Audio

 

 

 

 

LEMO Connector

 

 

 

(8.2 kΩ between pin 2 and 3, internal to UR1M)

Microphone Element

UR1M LEMO BOARD

 

Audio

Ground

Connector

Connector

UR1M Transmitter RF Output:

 

 

 

 

 

Connector:

 

SMA

 

 

 

Actual Impedance:

 

50 Ω

 

 

 

Pin Assignments:

 

Shell = Ground

 

 

Center = Signal

REPLACEMENT PARTS AND ACCESSORIES

Furnished Accessories

Antenna, 470-530 MHz

UA700

Antenna, 518-578 MHz

UA710

Antenna, 578-698 MHz

UA720

Antenna, 740-865 MHz

UA730

Antenna, 944-952 MHz

UA740

Threaded Locking Adaptor (UR1M with TA4F)

WA340

Optional Accessories

 

Bodypack Pouch (Black)

WA581B

Bodypack Pouch (White)

WA581W

3-Pin mini Lemo conversion kit

WA335

Note

To fully interact with the Receiver, it is recommended to upgrade the UR4 firmware to 1.50 or higher and Shure Wireless Workbench to 5.0

Certification:

UR1M: Type Accepted under FCC Parts 74 (FCC ID: DD4UR1MA, DD4UR1MB, DD4UR1MC, DD4UR1MD, DD4UR1MF, DD4UR1MG, DD4UR1MRA,

DD4UR1MRB, DD4UR1MRC, DD4UR1MRG). Certified by IC in Canada under RSS-123 and RSS-102 (IC: 616A-UR1MA, 616A-UR1MB, 616A-UR1MC, 616A-UR1MD, 616A-UR1MRA, 616A-UR1MRB, 616A-UR1MRC).

The “EU Declaration of Conformity” can be obtained from Shure Inc. or any of its European representatives. For contact information please visit www.shure.com

LICENSING INFORMATION:

Licensing: A ministerial license to operate this equipment may be required in certain areas. Consult your national authority for possible requirements.

Changes or modifications not expressly approved by Shure Incorporated could void your authority to operate the equipment. Licensing of Shure wireless micro- phone equipment is the user’s responsibility, and licensability depends on the user’s classification and application, and on the selected frequency. Shure strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies.

Information to User:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Operation of this device is subject to the following two conditions:

(1)this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired

operation of the device.

Note: EMC conformance testing is based on the use of supplied and recommended cable types. The use of other cable types may degrade EMC performance.

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055

2

Image 39
Contents Model UHF-R≤Wireless User Guide Model UHF-R≤Wireless User GuideImportant Safety Instructions Contents Feature Overview System Components All systems includeHandheld Systems Include Sync Receiver Controls and ConnectorsReceiver Parameters Receiver LCD InterfaceNetwork Parameters Device IDCustom Groups Networked or Dual Receivers Automatic Frequency SelectionBefore you begin Single ReceiverBasic Network Accessing the Network with a ComputerExisting UHF Network Installations Networking ReceiversHandheld and Bodypack Transmitter Controls and Connectors Transmitter LCD InterfaceTransmitter Batteries Transmitter Parameters Setting Transmitter GainRF Safety Mode Lock IndicatorsTo transfer other transmitter settings Automatic Transmitter SyncTo perform a transmitter sync Troubleshooting JBX SpecificationsUR1 Transmitter Audio Input Inputs and OutputsAntenna Combiners and Accessories Replacement Parts and AccessoriesFurnished Accessories Optional AccessoriesLicensing Information CertificationH4 Frequency Band 518.000 578.000 MHz J5 Frequency Band 578.000 607.975 614.025 638.000 MHz L3 Frequency Band 638.000 698.000 MHz 793.600 799.600 Q9 Frequency Band 740.000-805.975 MHzJ5E Frequency Band 578.000 638.000 MHz H4E Frequency Band 518.000 578.000 MHzL3E Frequency Band 638.00 698.000 MHz Group11 Q5 Frequency Band 740.000 814.000 MHzUHF-R Q5 R9 Frequency Band 790.000-865.000 MHz FIN BEL / TUR A24 Frequency Band 779-778 Q6 Frequency Band 740.125 751.875 MHz JBX Frequency Band 806-125, 809.750 MHzUA G6 UA G7 Q10 Frequency Band 740.000EU Declaration of Conformity &/$5$7,212&21250,7 Furnished Accessories INTER-GROUP Availability UHF-R G1 470-530MHz UHF-R Wireless User Guide Supplement UR1M Micro Bodypack Transmitter Addendum FeaturesInformation to User Certification
Related manuals
Manual 50 pages 42.24 Kb

UHF-R specifications

The Shure UHF-R is a premium wireless microphone system designed for professional use in live performances, broadcasting, and theater. Known for its unparalleled audio quality, robust build, and reliable performance, it has become a favorite among artists, sound engineers, and production companies globally.

One of the standout features of the UHF-R system is its advanced frequency diversity technology, which allows users to select from a wide range of channels and frequencies, greatly reducing the chances of interference. With up to 2400 selectable frequencies across 60 MHz of bandwidth, users can easily find a clear signal for their performances. This feature is especially beneficial in crowded environments, such as concert venues or festivals, where multiple wireless systems might be in use simultaneously.

The system offers analog audio outputs and digital signal processing that ensures the highest fidelity audio transmission. The UHF-R transmitters are equipped with Shure's renowned microphone capsules, allowing for different sound profiles tailored to vocalist preferences, and they provide precise, clear sound reproduction. Whether using a handheld microphone, bodypack, or guitar system, the flexibility of adapters and compatibility with various mics make it a versatile choice for any application.

Another significant characteristic of the UHF-R system is its exceptional range. With a line-of-sight operation, the system can reach distances up to 300 feet or more, depending on environmental factors. This feature allows performers the freedom to move around the stage without worrying about audio dropouts.

The system's user-friendly interface makes setup and operation straightforward. The LCD screen on both the receiver and transmitters provides real-time information on channel selection, battery status, and audio levels, ensuring that users are always aware of their system’s performance. Additionally, its wireless access control allows for remote operation and monitoring through Shure's Wireless Workbench software, enabling sound engineers to manage multiple systems easily.

Battery life is another strong point of the UHF-R system, with transmitters providing up to 8 hours of continuous use on standard AA batteries. As an added bonus, the transmitters come equipped with a battery status indicator, helping users keep track of their power levels.

Overall, the Shure UHF-R wireless microphone system combines superior sound quality, cutting-edge technology, and practical features, making it an essential tool for professional audio applications. Whether in a concert hall, a conference, or a theater, the UHF-R system delivers consistent performance that meets the demands of any high-profile event.