Pioneer VSX-39TX manual Basic Receiver LCD Screens, Receiver Main Screen

Displays & Controls

Basic Receiver LCD Screens

Receiver MAIN Screen

				1	-
	2	Receiver		MAIN SUB
	3		DSP	STEREO
4			/ dts	EFFECT	4
		THX	ADVANCED	STANDARD
			THEATER
		MIDNIGHT		MULTI CH	0
	5			IN
		DIGITAL	LOUDNESS	SIGNAL
		NR		SELECT

	7 8		9
6
1 Receiver MAIN button		8 2/dts buttons (See p.43-47)
Press this button to select the main receiver		Press these buttons to put the receiver in the
screen (above) when the remote control is on the		selected surround sound mode. For more
sub receiver screen.		information on the modes see p.43-45.

PREPARATION

2STEREO button (See p.44, 46, 48 & 53)

Switches the receiver into STEREO mode if it was in a different sound mode (like ADVANCED THEATER or THX CINEMA) or toggles between DIRECT and STEREO mode.

3DSP button (See p.45,46)

Press repeatedly to select a DSP sound mode.

4DIRECT FUNCTION on/off indicator

(See p.78)

These dots indicate weather the DIRECT FUNCTION is on or off for the function (DVD/LD, CD, etc.) they point to.

5MIDNIGHT button (See p.50)

Switches the MIDNIGHT LISTENING mode on or off (for all modes except THX and MULTI CH IN).

6DIGITAL NR button (See p.50)

Switches the DIGITAL NR on or off (for all modes except THX and MULTI CH IN).

7LOUDNESS button (See p.51)

Switches the LOUDNESS mode on or off (for all modes except THX and MULTI CH IN).

9SIGNAL SELECT button (See p.49)

Press SIGNAL SELECT repeatedly to select one of the following:

ANALOG : To select an analog signal.

DIGITAL : To select a digital signal (DVD/LD, TV/ SAT, CD, MD/TAPE 1, VCR 1, VCR 2).

AC-3 RF : To select an 2RF signal (DVD/LD, TV/ SAT, VCR 1, VCR 2).

AUTO : This is the default. If there are analog, digital and 2RF signals input, the receiver automatically selects the 2RF signal. If there are analog and digital signals input the digital will be selected.

0MULTI CH IN button (See p.52)

Use to hook up an external component that can decode other types of signals and input them into the VSX-39TX.

-EFFECT +/– button

Use these buttons to increase or decrease the amount of effect applied in a DSP or Advanced Theater mode. When the amount of effect is increased in a DSP/Advanced Theater mode the characteristics of that mode become stronger and more noticeable. The scale ranges from 10-90 with 70 as the default setting. First turn on the DSP/ Advanced Theater mode you want (by pressing the DSP/Advanced Theater button until you get the mode) and then increase or decrease the amount of effect.

27