Pioneer VSX-39TX manual Press the Setup OK button to return to System Setup Menu

Page 35

Initial Set Up

ONE (SINGLE) SURROUND BACK SPEAKER

Center

Sub

woofer Front

R

 

SURROUND (default setting is LARGE)

•

Select large if your speakers will reproduce bass

 

frequencies effectively.

•

Select small to send bass frequencies to the other

Front L

Surround L

Speaker Setting

+

+

+

+

+

+

BACK

THX

FREE

Surround R

SETUP

OK

speakers or subwoofer.

• If you did not connect surround speakers deselect

them. In this case, the sound of the surround channels

is output from the front and center speakers.

• Remember, If you select small for the front speakers,

the SURROUND and SURROUND BACK speakers can

only be set to SMALL.

SURROUND BACK (default setting is LARGE X2)

Surround back

NO SURROUND BACK SPEAKERS

Sub

Center woofer Front R

NOTE: In order to use SURROUND BACK speakers you need to hook them up through an external amplifier (see p.21 for more on this).

•

Select the number of SURROUND BACK speakers you

 

have. You can choose one speaker, two or none.

•

Select large if your speakers will reproduce bass

 

frequencies effectively.

Front L

Surround L

Speaker Setting

+

+

+

+

+

BACK

THX

FREE

Surround R

SETUP

OK

• Select small to send bass frequencies to the other

speakers or subwoofer.

• If you did not connect surround back speakers deselect

them. In this case the boxes in the diagram will appear

empty, as shown on the left.

• If the FRONT speakers or the SURROUND speakers are

set to SMALL, the SURROUND BACK speakers will

automatically be set to SMALL.

• If you choose THX in step 2 then the SURROUND

SET UP

Surround back (not hooked up)

BACK speakers can only be set to small (or off).

Speaker Setting

+

+

+

++

BACK

+

THX

FREE

+

SETUP

OK

4

SUBWOOFER (default setting is YES)

• Leave it selected if you connected a subwoofer.

• If you did not connect a subwoofer deselect it. In this

case, the bass frequencies are output from the front or

surround speakers.

• Choose the PLUS setting if you want stronger reproduc-

tion of deep bass sounds.

• If you select PLUS the bass frequencies that would

normally come out the front and center speakers are all

routed to the subwoofer.

Ç

• If you selected SMALL for the FRONT speakers the

subwoofer will automatically be set to on (you won’t be

Speaker Setting

+

+

+

++

BACK

+

THX

FREE

+

SETUP

OK

able to choose off or PLUS).

4Press the SETUP OK button to return to

the SYSTEM SETUP MENU.

Hold the remote control pointed towards the receiver until you see the “RECEIVED” display on the receiver.

If "ERROR" flashes in the display, perform the setup operations from the first step again.

memo

If you have a subwoofer and like lots of bass, it may seem logical to select LARGE for your FRONT speakers and leave the subwoofer selected. This may not, however, yield the best bass results. Depending on the size and shape

SIGNAL

 

 

VOLUME

 

 

SELECT

 

A

ANALOG SP

dB

The settings you chose will be displayed on your TV.

of your room you may actually experience a decrease in the amount of bass due to what is called "low frequency cancellations." If you have a subwoofer, listen to the bass response with the FRONT speakers set to LARGE and SMALL alternatively and let your ears judge which sounds best.

If you have a subwoofer, the safest option is to route all the bass sounds to it by selecting SMALL for the FRONT speakers.

Speaker Setting

[

FREE

]

[THX]

Front L

[LARGE]

Center

[LARGE]

Surround

[LARGE]

SurrBack

[LARGEx2]

Subwoofer

[ YES ]

Next, proceed to CHANNEL DELAY below.

If you want to change a setting before proceeding

simply press the button of the speaker you want to change.

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents VSX-39TX Information to User For U.S. modelImportant Notice For Canadian modelImportant Safety Instructions Optical Digital Connection Quick Start GuideHooking Up Your DVD Player & TV Coaxial Digital ConnectionSpeaker Connections Setting up the Remote Control & UnitDigital Input Assignment Hold the remote control pointed towards the receiverPlay a DVD Press the DVD/LD button on the remote controlPlaying a DVD with Surround Sound For Better Surround SoundFeatures Table of Contents Before You Start Checking the Supplied AccessoriesHow to Use This Manual Preparing the Remote ControlOpening the Front Panel Installing the ReceiverAudio cords Connecting Your EquipmentCassette deck placement Audio ComponentsCoaxial cord Digital ConnectionsCoaxial cords/Optical cables Digital Input Assignment Example Connection for a DVD/LD or LD playerFront Connecting DVD/LD playersConnecting VCRs or DVRs Video ComponentsOr standard video cord Satellite TV ComponentsTV/monitor Multi Channel Input External DecoderFM wire antenna AM loop antenna Connecting the Radio AntennasUsing outdoor antennas Front speaker a Left Surround Speaker SpeakersSpeaker terminals Speaker placementPlacing Your Speakers Plugging Connecting Additional AmplifiersFront Panel Displays & ControlsTreble -/+ button See p.51 Signal Select button See p.49Source indicators Bass -/+ button See p.51Display Tuner indicators 11 2/ dts mode indicatorsMaster Volume indication Tape 2 indicatorRemote Control Receiver Main Screen Basic Receiver LCD ScreensReceiver SUB Screen On Screen Display Initial Set UpSwitching video system between PAL and Ntsc Press the LCD Commander Button Setting Up the Remote ControlPress Remote Setup on the remote control Back Light SET UPSetting Up for Surround Sound Digital Input Select System SetupSpeaker Setting Press the Setup OK button to return to System Setup Menu Menu Channel DelayPress the Channel Delay button Press the Setup OK button to return to the System SetupTest Tone Channel LevelPress the Channel Level button If you are using a Sound Pressure Level SPL meter Auto modeManual mode 150 Hz Crossover Network80 Hz 100 HzLevel Bass Peak Level ManagerPress the SET button to input Dynamic Range Control Dual Mono Setting Standard modes Basic PlaybackSound Modes Advanced Theater modes Home THX Cinema modesDSP modes Stereo modePress Receiver Selecting a Sound ModeUsing surround sound Select the sound modeControl to select the source you Playing Sources with Dolby Digital or DTS SoundPress the Function on the remote Playing Sources with Stereo Sound Main Switching ANALOG/DIGITAL Signal InputReducing Noise During Playback Digital NR Function Listening in Midnight ModeSelect button on the front panel to Remote control or ChannelAdjust channels Press the CH Select button onKHz 24 bit Performance Multi Channel in SettingMulti Channel in Playback Direct Playback Adjusting the Brightness of the DisplayPress the Band button to select Band FM or AM Using the TunerAutomatic and Manual Tuning Press the TunerDirect Access Tuning Press the Class button repeatedly Using the front panel Tune in the station you wantMemorizing Frequently Used Stations Press the Memory button to activate the memory functionSelect the Tuner function Recalling Memorized StationsSetting Up the Remote Control to Control Other Components Remote Control of Other ComponentsTo exit the process without inputting the com- mands Select the name of the company That makes your componentPress the Number 1 button To go back a screenCannot be used If you want to cancel the Remote Setup modePress the Learning button Locking the Settings Use the Back button to return to the basic Receiver screen Item MemoHas the button you want to Key RenamePress the KEY Rename button Press the Function button that+10 Using Remote Control with Other ComponentsDVD or LD player operations Number buttonsMemo CD player operationsREC MD operationsCH -/+ TV operationsStandard TV screen Digital TV screen VOL -/+STB DTV operations Catv operationsB/C/D/E STB satellite tuner operationsSatellite Tuner screen L1-3Tape Cassette deck operationsDVR DVD Recorder operations Other screen for preset operationsVCR operations CD-R operationsRecording from Video Components Using Other FunctionsRecording from Audio Components Different possible video inputs Video SelectFront panel to cycle through Press the Multi Operation Press the Remote Setup buttonMulti Operations Leave the multi operation set up Select a command from the screenSequence of up to five commands When done press Setup OK to inputSystem OFF Press the Back button repeatedly When done press Setup OK toInput the information Resetting the Remote Control Setting up the Direct FunctionMULTI-ROOM connections Set up exampleMulti-Room Select the IR Receiver type MULTI-ROOM set upSelect the Volume Level by Pressing Variable or Fixed Press the Multi Room buttonSelector Press the Multi Room & SourceButton Adjust the volume Using the remote control with the MULTI-ROOM systemPress Master Volume +/- to Pioneer Pioneer SR System Operating other Pioneer componentsComparison with Dolby Pro Logic Surround Techno Tidbits & Problem-solvingDolby Digital Laser disc formatDTS Symptom Cause Remedy TroubleshootingSet Signal Select to DTS EIA Power cord CautionSpecifications Page 0 4 2 1 1 4 0

VSX-39TX specifications

The Pioneer VSX-39TX is a high-performance audio/video receiver that exemplifies the brand's commitment to delivering superior sound quality and advanced technology. Released as part of Pioneer's flagship series, the VSX-39TX is designed for audiophiles and home theater enthusiasts seeking an immersive entertainment experience.

One of the standout features of the VSX-39TX is its robust amplification system. It boasts a 7.1-channel configuration that delivers powerful and clear audio across multiple channels. With a total power output of 110 watts per channel, this receiver is capable of driving a wide range of speakers, ensuring an engaging listening experience whether you're enjoying music or diving into a cinematic film.

The VSX-39TX also supports various audio formats, including Dolby Digital EX, DTS-ES, and the latest Dolby TrueHD and DTS-HD Master Audio. This extensive surround sound support allows for a truly immersive audio experience. The receiver’s advanced audio processing technology helps in accurately decoding these formats, ensuring that the sound is not only powerful but also precise and detailed.

Another significant aspect of the Pioneer VSX-39TX is its video capabilities. The receiver features multiple HDMI inputs, supporting 1080p video resolution and providing a complete connection solution for high-definition devices. Its integrated video upscaling feature enhances lower resolution content, allowing users to enjoy their entire media library at the highest quality possible.

The VSX-39TX also emphasizes flexibility with its extensive connectivity options. In addition to HDMI, it includes composite and component video inputs, making it compatible with a variety of source devices. Furthermore, the receiver features a built-in AM/FM tuner and is equipped with a direct-access port for digital audio input, providing versatility for users.

To enhance user experience, the VSX-39TX comes with a well-designed remote control and an intuitive on-screen display, allowing for easy navigation through the setup process and adjustment of settings. The receiver also supports Pioneer's Multi-Room function, enabling audio playback in different zones of the home.

In summary, the Pioneer VSX-39TX stands out with its combination of powerful amplification, extensive surround sound support, and versatile connectivity options. Its commitment to delivering high-quality audio and video makes it a formidable choice for anyone looking to elevate their home entertainment system. Whether you are listening to music or watching movies, the VSX-39TX is built to provide a captivating audio-visual experience.
Top Page Image Contents