Shure 27C8642 manual System Contents, System Combinations, T88 Wireless Receiver Figure

ENGLISH

INTRODUCTION

The Twin Pro￿ Wireless System is the finest in its class. This system will give you excellent performance for years to come.

System Contents

The Twin Pro Wireless System contains the following components:

•One T88 dual channel wireless receiver

•Two transmitters available in one of three different combina- tions (see System Combinations below)

•One PS20 (120 Vac) or PS20E (230 Vac) power adapter

•One plastic screwdriver for squelch adjustment

System Combinations

The Twin Pro system includes one of the following three transmit- ter combinations:

•Two handheld microphone transmitters (includes two swivel adapters and two anti-roll devices)

or

•Two body-pack transmitters with lavalier microphones

or

•One handheld microphone and one body-pack transmitter (includes one swivel adapter and one anti-roll device)

DESCRIPTION

T88 Wireless Receiver (Figure 1)

FRONT5

1	2	3	4	1	2	3	4
							5

7	6	7
		BACK

FIGURE 1

1Power Indicators.

2RF Signal Indicators. Yellow indicates when RF (radio frequency) signals are received from the transmitter.

3Audio Peak Indicators. These lights flicker occasionally in normal operation. They are ON steadily when the au- dio input is overloaded.

4Volume Controllers. Controls the audio output level.

5Telescoping Antennas. Receive signals from the transmitters. Make sure the antennas are fully extended vertically.

6Power Input Connector. Connects to a PS20 (120 Vac) or PS20E (230 Vac) power adapter.

7Independent Audio Output Connectors. There is a

separate, unbalanced 1/4 inch phone jack for each channel.

1