ENGLISH
T2 Handheld Microphone Transmitter (Figure 2)
5
ÑÑ
ÑÑÑÑ
6
Ñ ÑÑÑÑÑÑÑÑ
ÑÑÑÑÑÑÑ Ñ | Ñ |
Ñ Ñ | ÑÑÑÑ | Ñ |
OFF PWR | 1 |
|
T1 Body-Pack Transmitter (Figure 3)
| ÑÑÑÑÑÑÑÑ |
| 3 |
|
|
| ÑÑÑÑÑÑÑÑÑÑÑÑÑÑ |
| 4 | 10 | Ñ |
|
|
| 5 6 7 |
| |
| ÑÑÑÑÑÑÑÑÑÑÑÑÑÑÑ |
|
| Ñ | |
| ÑÑÑÑÑÑÑÑÑÑÑ | Ñ |
| 8 |
|
1 | ÑÑÑÑÑÑÑÑ | ÑÑ | Ñ |
|
|
|
|
|
ÑÑÑÑÑ ÑÑÑÑ
ÑÑÑÑÑ ÑÑÑÑ
Ñ | Ñ | 2 | Ñ Ñ | 7 |
|
|
|
| |
Ñ | Ñ | 3 | Ñ | ÑÑ ÑÑ |
| ON |
|
| |
Ñ |
| 4 |
| ÑÑ ÑÑÑÑ Ñ |
|
|
|
| |
| MUTE |
|
| ÑÑ ÑÑÑÑÑÑÑ |
FIGURE 2
2
ÑÑÑÑÑ9
ÑÑÑÑÑ
ÑÑÑ
FIGURE 3
1POWER ON/OFF Switch. Turns transmitter on and off.
2POWER Indicator. Lights when transmitter is turned on.
3LOW BATTERY Indicator. Red light glows when you have one hour or less of useful operating time; when this light glows, change the battery.
4MIC ON/MUTE Switch. Lets you turn the microphone audio on and off (muting the microphone).
5Audio Gain Control. Provides audio level adjustment to accomodate different sound sources.
69V Alkaline Battery (shown installed). Provides power to the
7Battery Cover. Unscrews for access to the 9V alkaline battery and gain control.
1Battery Compartment.
2Antenna. For best operation, the antenna must hang vertically, and should not be coiled or bundled.
3Belt Clip. Allow transmitter to be attached to belt.
4POWER Indicator.
5POWER ON/OFF Switch. Turns transmitter on and off.
6Audio ON/MUTE Switch. Mutes the transmitter to pre- vent unwanted sounds from being picked up by the re- ceiver without turning the transmitter off.
7LOW BATTERY Indicator. When this red light is glow- ing, you have one hour or less of useful operating time; change the battery.
8Audio Gain Control. Provides audio level adjustment to accommodate different sound sources (e.g., speaking or playing an instrument). The factory setting is at
9Microphone Input Connector.
10Lavalier Microphone. Condenser lavalier microphone supplied with a mount that clips onto a tie, lapel, or acoustic instrument.
2