Budda V30H manual Rear Panel

Page 5

G u i t a r A m p l i f i e r H E A D

The Rear Panel:

16

17

18

19

15.AC Line Cord (not shown): The grounded power cord should only be plugged into a grounded power outlet that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stat- ed on the rear panel. Do not attempt to defeat the safety ground connection.

16.Footswitch: Use this jack to connect the supplied two-button footswitch for remote control of channel switching and the Boost function. The front panel Clean/Overdrive and Boost switches (#3,#6) are inoperative when a footswitch is connected.

17.Line Out: Use this 1/4” jack to send a line level signal to a mixing board, external power amplifier or powered monitor, or to the input jack of an exter- nal signal processor.

18.Line In: Use this 1/4” jack to connect the output of an external effects proces- sor to the amplifier.

19.8 Ohm Speaker: Use this jack to connect the external cabinet to the amplifier by means of a heavy duty Class 2 wiring speaker cable terminated with 1/4” plugs. The total impedance rat- ing for the external speaker(s) must be 8 ohms.

WARNING: The speaker output of this unit can exceed 10 Watts and could be a shock injury. Connection to speakers should be performed by a skilled person in compliance with local building codes. Class 2 wiring is required for speaker cables. Use of external speakers outside the ratings stated at the speaker jack may result in a shock injury or damage to the unit.

5

Image 5
Contents E R ’ S G U I D E I t a r a m p l i f i e r H E a D Table of ContentsCongratulations Front Panel Lamp This lamp illuminates when the amplifier is turned onRear Panel Piggy Back Mounting onto the V212T Speaker Cabinet Tube Types And Usage Important Information About Tubes and Tube ProductsBrief History Of The Tube Nature Of Tubes Why And When To Replace Them Importance Of Proper Biasing Survival Tips For Tube Amplifiers Declaration of Conformity System Block DiagramV30H Technical Specifications