Les vis des crampons figure | Polk Audio LC65I, LC60i, LC265i

•To install the speaker, first carefully remove the grille using a straightened paperclip or other pointed metal tool. Insert the point into one of the grille perforations near a corner and lift the grille free. Never use a knife or screwdriver to pry between the grille and the speaker frame. This will damage your speaker.

•Loosen the rotating wall clamps by unscrewing them. Make sure that the rotating wall clamps are flipped inwards so that your speaker fits into your cutout without nicking your wall. Then place the speaker carefully into the cutout [figure 13]. If you have a level, use it to help you correctly align the speaker. Tighten the wall clamp screws with a screwdriver. This will rotate the wall clamps and secure the speaker to the wall. Hint—on the LC265i and LC65i models, tighten the center screws before tightening the corners for the most flush

fit to your wall. Do not overtighten the wall clamp screws [figure 14].

•Carefully reinstall the grille by fitting it into its recess so that it is just resting on the frame. Starting with one corner, go around the speaker and push the grille into the grille notch a little bit at a time. Be gentle; the grille may be easily bent out of shape by rough handling. You will feel a positive “snap” when it is fully in place.

•Pour installer le haut-parleur, retirez délicatement la grille à l’aide d’un trombone ou d’un outil pointu. Insérez la pointe dans un des trous dans un coin de la grille et dégagez la grille. N’utilisez jamais un couteau ou un tournevis entre la grille et le cadre pour retirer la grille, cela pourrait endommager votre haut-parleur.

•Desserrez les crampons rotatifs en les dévissant. Assurez-vous que les crampons rotatifs sont dirigés vers l’intérieur de façon à ce que votre haut-parleur puisse pénétrer l’embrasure sans érafler le mur ou le plafond. Placez ensuite délicatement le haut-parleur dans l’embrasure (figure 13). Alignez correcte- ment le haut-parleur à l’aide d’un niveau. Resserrez les vis des crampons avec un tournevis. Cela fera tourner les cram- pons qui fixeront solidement votre haut-parleur au mur ou au plafond. Conseil: pour les modèles LC265i et LC65i resserrez les vis du milieu avant de resserrer les vis des coins—le haut-parleur sera ainsi mieux affleuré. Ne serrez pas trop

les vis des crampons [figure 14].

•Réinstallez soigneusement la grille en la posant d’abord déli- catement sur l’encoche du cadre. En commençant par un coin, poussez petit à petit la grille dans son encoche tout autour du cadre. Soyez délicat, la grille peut être facilement déformée.

Vous sentirez la grille «cliquer» en place.

FIGURE 13

Place the speaker carefully into the cutout. Coloque cuidadosamente el altavoz en el agujero.

Placez délicatement le haut-parleur dans l'ouverture.

Platzieren Sie die Lautsprecher vorsichtig in der ausgeschnittenen Öffnung.

FIGURE 14

Tighten retaining wall clamps to engage wall. Use a #2 Phillips head screwdriver or a powered screwdriver.

Apriete las prensas de retención de la pared para enganchar el altavoz a la pared. Use un destornillador Phillips No. 2 o un destornillador eléctrico.

Reserrez les attaches murales pour fixer solidement l’unité au mur. Utilisez un tournevis ou une perceuse à tête Phillips no 2.

Ziehen Sie die Wandklemmen fest, um das System an der Wand zu befestigen. Verwenden Sie dazu einen Kreuzschlitzschraubendreher (Nr. 2) oder einen Schraubendreher mit Motorantrieb.

For Customer Service, call 800-377-7655. 11

LC65I, LC265i, LC60i specifications

The Polk Audio LC265i is an in-wall speaker that promises to deliver high-quality sound while seamlessly blending into your home decor. Designed to provide an immersive audio experience, it features a robust set of technologies and characteristics suitable for music lovers and home theater enthusiasts alike.

One of the standout features of the LC265i is its Dual 6.5-inch Dynamic Balance woofers. These woofers are designed to produce powerful, rich bass without distortion, even at higher volumes. This ensures that every note and beat is delivered with clarity and depth. Complementing the woofers is a 1-inch Silk Dome Tweeter, which provides smooth, detailed high frequencies. Together, these components work to create a balanced audio profile, suitable for various genres of music and movie playback.

The LC265i also integrates Polk's patented Dynamic Balance technology, which helps in minimizing distortion and enhancing overall sound quality. This technology involves a unique process of analyzing the speaker’s performance to optimize the materials and design, ensuring that the speakers perform at their best across all frequencies.

Installation of the LC265i is convenient, thanks to its easy-to-mount design. This speaker comes with a low-profile, paintable grille, allowing users to customize the look to match their home aesthetics. The grille can be painted to blend seamlessly with the wall, making it virtually invisible and maintaining the clean lines of your living space.

This in-wall speaker is also compatible with various home audio setups, making it an excellent choice for multi-room audio systems or theatre systems. Its versatility allows it to be used in both stereo and surround sound configurations, providing flexibility for any audio arrangement.

The LC265i is built with Polk’s commitment to durability and reliability. Constructed with high-quality materials, this speaker is designed to withstand the test of time. Its rugged design makes it suitable even for more demanding environments, providing peace of mind for long-term installation.

In summary, the Polk Audio LC265i is an impressive in-wall speaker that combines advanced technology, robust construction, and aesthetic appeal. With its dynamic performance and customizable design, it is a perfect choice for anyone looking to enhance their audio experience while maintaining an elegant living space. Whether for music, movies, or gaming, the LC265i provides an exceptional audio solution.