Crate Amplifiers V32H Front Panel, Lamp This lamp illuminates when the amplifier is turned on

Page 4

V32H GUITAR AMPLIFIER HEAD

The Front Panel:

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1.Input: Connect your instrument here by means of a shielded signal cable.

2.Clean Volume: Use this control to adjust the output level of the Clean Channel.

3.Clean/Overdrive: This switch, when de- pressed, selects the Overdrive Channel. When this switch is in the out position, the Clean Channel is selected.

4.Overdrive Gain: Use this control to adjust the gain of the Overdrive Channel. With the control towards the counter clock- wise position, the gain is low and very little distortion is present. As you rotate the con- trol clockwise the gain increases, produc- ing more overdrive distortion and a higher output volume level.

5.Treble: Use this control to adjust the out- put level of the high frequencies. This con- trol provides 12dB of cut or boost at 6kHz.

6.Boost: This switch, when depressed, increases the output by 10dB at 900Hz, giving the middle frequencies more punch.

7.Mid: Use this control to adjust the output level of the middle frequencies. This control provides 10dB of cut or boost at 1kHz.

8.Bass: Use this control to adjust the out- put level of the low frequencies. This con- trol provides 8dB of cut or boost at 150Hz.

9.Presence: This switch, when depressed, increases the output level of the high frequencies by 8dB at 10kHz, giv- ing a more “glassy” sound to the amplifier. This helps the output of the amplifier cut through “acoustically dead” rooms.

10.Overdrive Level: Use this control to adjust the output level of the Overdrive Channel.

11.Reverb: Use this control to adjust the amount of reverberation applied to the sig- nal. With the control fully counter clockwise no reverb is applied. As you rotate the con- trol clockwise the amount of reverb increas- es.

12.Lamp: This lamp illuminates when the amplifier is turned on.

13.On/Standby: Use this switch to acti- vate the amplifier. The On/Off switch (#14) should be turned on first. Allow 20 seconds for the amplifier to warm up before turning the Standby switch on.

14.On/Off: Use this switch to turn the amplifier on and off. This switch should be turned on at least 20 seconds before turn- ing the Standby switch (#13) on.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents E R ’ S G U I D E Table of Contents V32H Guitar Amplifier HeadCongratulations Lamp This lamp illuminates when the amplifier is turned on Front PanelRear Panel Piggy Back Mounting onto the V212 Speaker Cabinet Brief History Of The Tube Important Information About Tubes and Tube ProductsTube Types And Usage Nature Of Tubes Why And When To Replace Them Importance Of Proper Biasing Survival Tips For Tube Amplifiers System Block Diagram Declaration of ConformityV32H Technical Specifications

V32H specifications

The Crate Amplifiers V32H is a powerhouse of versatility and performance, designed to meet the demands of guitarists across a range of genres. This all-tube guitar amplifier head boasts a robust and elegant design, showcasing the perfect blend of classic and modern technology that makes it a top choice among musicians.

One of the standout features of the V32H is its all-tube circuit design, utilizing two 6L6 power tubes and three 12AX7 preamp tubes. This configuration delivers rich, warm tones and exceptional dynamics, making it ideal for everything from crisp cleans to saturated crunch. The amp also incorporates a unique variable wattage control, allowing players to switch between 32 watts and a lower, more saturated output for cranked-up tube overdrive at manageable volumes. This feature ensures that players can achieve the sweet spot of tube saturation without overwhelming their surroundings.

The V32H is equipped with two channels: Clean and Overdrive. The Clean channel offers a pristine, bell-like tone with a dynamic response, perfect for jazz, blues, and rock. The Overdrive channel features adjustable gain, allowing for everything from subtle breaks to aggressive, high-gain tones suitable for hard rock and metal. Each channel has its own EQ controls, consisting of bass, middle, and treble, providing musicians with the tools to shape their sound to perfection.

Moreover, the amp includes a built-in reverb, adding depth and ambiance to the overall tone. This feature can be adjusted to taste, enabling players to enhance their sound without requiring external effects. The amp also has a series effects loop, allowing for integration with other pedals and effects, making it even more versatile for live performances and studio work.

Additionally, the V32H is designed with high-quality components, ensuring reliability and longevity. The rugged construction is built to withstand the rigors of touring, while the stylish aesthetics contribute to its professional appeal. With its powerful sound, flexible features, and durable build, the Crate Amplifiers V32H stands out as an exceptional choice for guitarists looking for a reliable and high-performing amplifier head. Whether at home, in the studio, or on stage, the V32H delivers an unparalleled tonal experience.
Top Page Image Contents