Crate Amplifiers BFX100T manual Using the Transport Handle, Using the Tilt-Back Peg

BFX100T Professional, Transportable Bass Amp with DSP

Using the Transport Handle:

(1)Squeeze the handle together just below the attachment bracket

(2)Lift the lower end of the handle up and out in an arcing motion

(3)Lock the handle into the attachment bracket in its upright position (Reverse the steps to put the handle away)

3LOCK

SQUEE
1	ZE

2LIFT

Using the Tilt-Back Peg:

(1)Lift the tilt-back peg up and out of its retaining clips

(2)Screw the threaded end of the tilt-back peg into the fitting on the rear of the cabinet

The cabinet may now be used as a personal monitor – tilting it back also increases its range of coverage (Remove the peg from the fitting and store it in its retaining clips when not in use)

1

LIFT UP,

PULL OUT

2SCREW INTO

FITTING

3