BFX100T Technical Specifications | Crate Amplifiers specs

BFX100T TECHNICAL SPECIFICATIONS:

Output Power Rating	100 watts RMS @ 1% THD 4 ohms, 120 VAC
Speaker Size and Rating	(1) Custom Design 15”, 2” voice coil, 150 watts RMS
	(1) LeSon Dome Tweeter

Graphic Equalizer	24dB range @ 50Hz, 100Hz, 225Hz, 625Hz,
	1.6kHz, 4kHz, 8kHz, 16kHz

Input Impedance	200k ohms

Maximum Input Signal Level Accepted	15 volts peak-to-peak

Gain @ 1kHz	65dB w/EQ flat, contour off

Line Output Jack	2 volts peak-to-peak @ full rated power

Balanced Line Out Jack	2 volts peak-to-peak @ full rated power w/600Ω load

Power Requirements	120 VAC, 60Hz, 115VA
	100/115VAC, 50/60Hz, 115VA
	230VAC, 50/60Hz,115VA

Size and Weight	21.5” H x 20” W x 16.5” D, 67 lbs.

The BFX100T is covered with a durable black Tolex material: wipe it clean with a lint-free cloth.

Never spray cleaning agents onto the cabinet. Avoid abrasive cleansers which would damage the finish.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications

and information in this manual are subject to change without notice.

www.crateamps.com

@2001 SLM Electronics, a division of St. Louis Music, Inc • 1400 Ferguson Avenue • St. Louis, MO 63301

47-949-01 • 05/01