03Connecting up
AC outlet
[switched 100 W (0.8 A) max]
Power supplied through this outlet is turned on and off by the receiver's power switch. Total electrical power consumption of connected equipment should not exceed 100 W (0.8 A).
AC OUTLET
SWITCHED 100 W MAX 0.8 A MAX
DO NOT CONNECT A MONITOR, TV SET, HEATER, OR SIMILAR
APPLIANCE TO THIS UNIT'S AC OUTLET.
Do not connect appliances with high power consumption to the AC OUTLET in order to avoid overheating and fire risk. This can also cause the receiver to malfunction.
•Make sure no exposed speaker wire is touching the rear panel, this may cause the receiver to turn off automatically.
•This unit should be disconnected by removing the power plug from the wall socket when not in regular use (ex. when on vacation).
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or an electric shock. Do not place the unit, a piece of furniture, etc., on the power cord, or pinch the cord. Never make a knot in the cord or tie it with other cords. The power cords should be routed such that they are not likely to be stepped on. A damaged power cord can cause a fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest Pioneer authorized service center or your dealer for a replacement.
Operating other Pioneer components
CONTROL
By connecting a control cord (optional),
CONTROL
OUT
IN
you can point the remote controls of other Pioneer components at the receiver’s remote sensor. You can also use the remote control from this unit to control a Pioneer DVD player. The remote control
OUT
signals are received by the remote sensor of this unit, and sent to the other devices via the CONTROL OUT terminal.
20
En
Receiver
Remote control unit
Other Pioneer products with CONTROL terminals
Connect to CONTROL
IN terminal of other
Pioneer products with
CONTROL terminals