Pioneer vsx-d412 manual Making Recordings Making an audio or a video recording

Page 44

08Making Recordings

Making an audio or a video recording

You can make an audio or a video recording from the built-in tuner, or from an audio or video source connected to the receiver (such as a CD player or TV) through the analog jacks. You will need to connect a CD recorder, tape deck, MD, VCR, or DVR deck to the CD-R/TAPE/MD or VCR/DVR outputs on the receiver to do so (see pages 14–15 for more on this).

The receiver's volume, balance, tone (bass, treble, loudness), and surround effects have no effect on the recorded signal.

1Select the source you want to record. Use the INPUT SELECTOR (VSX-D412)/MULTI CONTROL (VSX-D512) buttons on the remote (or MULTI JOG/INPUT SELECTOR dial on the front panel).

2Prepare the source you want to record. Tune to the radio station, load the CD, video, DVD etc.

3Prepare the recorder (connected to either the CD-R/TAPE/MD or VCR/DVR outputs).

Insert a blank tape, MD, video etc. into the recording device and set the recording levels.

Refer to the instructions that came with the recorder if you are unsure how to do this. Most video recorders set the audio recording level automatically—check the component’s instruction manual if you’re unsure.

4Start recording, then start playback of the source component.

Monitoring your recording

You can listen to (monitor) the recording as it's being made using the MONITOR button on the front panel (a cassette deck would have to have a record monitor function).

•Press the MONITOR button to switch between the recorded signal and the original source signal.

44

En

Page 43 Page 45
Image 44
Page 43 Page 45
Contents VSX-D412VSX-D512 Important Notice Page Contents Making recordings Installing the receiver Before you start Checking what’s in the boxLoading the batteries Making cable connections23ft 7m Before you start Operating range of remote control unitRemote control may not work properly if 02 5 minute guide Introduction to home theater Hook up your TV Minute guide Listening to Surround SoundHook up your DVD player 02 5 minute guide Connect your speakersPlay a DVD, and adjust the volume to your liking Minute guidePress Enter 02 5 minute guide Using the Quick Setup1ch Connecting up Audio/Video cordsDigital audio cords/Optical cables Video cables VSX-D512 onlyArrows indicate the direction of the audio signal Connecting up Connecting digital componentsConnecting audio components Connecting up Connecting DVD 5.1 channel components Connecting video componentsSignal Arrows indicateConnecting antennas FM wire antennaConnecting up AM loop antenna Using external antennasAntenna snap connectors To improve FM receptionSnap shut the speaker terminal to secure Connecting the speakersSpeaker terminals Hints on speaker placement Operating other Pioneer components Connecting up AC outletBy connecting a control cord optional Controls and displays Remote Control VSX-D512 Controls and displays Guide Use to display the guides on a digital TVSubtitle TV Control buttonsDVD Tuner controls DVD Control buttonsControls and displays Front Panel STANDBY/ONEnter Tuner EditUse when listening to movie soundtracks at low volumes Quick SetupMidnight LoudnessControls and displays Display Tuner indicators Master volume levelLoudness Lights during Loudness listeningPlaying sources Introduction to Sound Modes Stereo/DirectStandard modes Advanced Surround modesPlaying sources Choosing the input signalUsing Stereo/Direct Playing sources Listening to multi-channel playback Using Advanced SurroundUsing Loudness and Midnight listening Using the tone controls Press Tone to select the frequency you want to adjustPlaying other sources Press MIDNIGHT/LOUDNESSPlaying sources Selecting the multi-channel analog inputs Select DVD/LD if it is not already selectedSubwoofer setting Setting up the receiver Choosing your receiver setupSpeaker setting Setting up the receiver Speaker settingSubwoofer setting Crossover frequency settingLFE attenuator setting Front speaker distance settingCenter speaker distance setting Surround speaker distance set- tingDynamic range control setting Dual mono settingCoaxial digital input setting Optical digital input settingPress Standard Press Test Tone to output the test tone Use Level +/- to adjust the speaker levels in turnWhen you’re done, press Test Tone to turn off the test tone Using the tuner Listening to the radio Automatic tuningManual tuning High speed tuningImproving FM stereo sound Using the tunerTuning directly to a station VSX-D512 only Display shows ST. MEMORY, then a blinking memory class Using the tuner Saving station presetsTune to a station you want to memo Rize Using the tuner Naming station presets Listening to station presetsChoose the station preset you want to name Input the name you wantMaking Recordings Making an audio or a video recording Monitoring your recordingDVD/LD TV/SATVCR/DVR CD-R/TAPEDirect function VSX-D512 only LED lightsLED blinks again LED blinks345 Volume InputSelect Channel DiscControlling the rest of your system Controls for other components VSX-D512 onlyEnter Channel Manufacturer Code STB SATELLITE/CATVManufacturer On digital STBVCR DVD RecorderCD-R TapeAdditional information Troubleshooting Adjust the Master VolumePlace the antenna farther away from the equipment causing ReceiverAdditional information No sound from surround or center speakersFront panel refer to Remove the obstacle or operate from another positionAdditional information Specifications Amplifier SectionVideo Section FM Tuner SectionPower Consumption 260 W Dimensions16-9/16 W x 6-4/16 H x 15-8/16 D Furnished PartsAdditional information Additional information Additional information Pioneer Corporation TNGZW/02L00001 Printed XRB3019-A
Related manuals
Manual 60 pages 51.06 Kb

vsx-d412 specifications

The Pioneer VSX-D412 is a versatile and feature-rich home theater receiver that appeals to both audiophiles and casual listeners alike. Launched in the early 2000s, this model showcases a commitment to delivering high-quality sound and performance in an affordable package.

One of the standout features of the VSX-D412 is its power output. This receiver is rated at 100 watts per channel, which means it can drive a wide range of speakers to deliver clear and dynamic audio. The device supports various speaker configurations, including 5.1-channel setups, allowing users to create an immersive surround sound experience.

In terms of connectivity, the VSX-D412 excels with multiple inputs and outputs. It includes several analog audio inputs and supports composite video, making it compatible with a variety of sources like DVD players, gaming consoles, and cable boxes. The standard surround sound formats, including Dolby Pro Logic and Dolby Digital, ensure that viewers can experience movies and music with rich, enveloping sound.

The device also features the Advanced Surround Technology, which enables users to customize their audio experience further. With preset sound modes designed for movies, music, or games, users can easily switch between profiles to suit their viewing or listening preference.

Additionally, the VSX-D412 incorporates Pioneer’s proprietary technologies, such as the Auto Level Control, which helps maintain a consistent volume level across different audio sources. This is particularly useful when switching between loud action movie scenes and quieter dialogue, ensuring that users do not need to adjust the volume constantly.

Remote control functionality adds to its convenience, allowing users to manage all their audio and video components from a comfortable distance.

The design of the Pioneer VSX-D412 reflects simplicity and practicality, with a user-friendly interface that allows quick access to various functions.

In summary, the Pioneer VSX-D412 is a reliable home theater receiver that combines quality sound performance, versatile connectivity options, and user-friendly features. It remains a solid choice for those seeking to enhance their audio experience without breaking the bank, making it a notable investment for home entertainment enthusiasts.
Top Page Image Contents