INSTALLATION OF THE RECEIVER
USED AS A STAND ALONE SYSTEM
1.Install an antenna perpendicularly to the antenna input jack 
at the rear panel of the receiver 
as shown in Fig. 1.
CONNECT
1.Connect the AF output of the receiver from unbalanced output jack 
to input jack of the mixer by an output cable attached with "PHONE" plug 
as shown in Fig. 2.
2.Connect a power adapter to the DC power supply input socket 
then plug the adapter to an appropriate AC outlet with caution to the correct voltage under both AC outlet and adapter marked. as shown in Fig. 3.
USED AS A PACK MOUNT SYSTEM
1.Mount the two connected 
as shown in Fig. 4.