| 3 |
1 | 2 |
Unlatch cover and insert a | Tur n the t ra n sm i tte r P o we r “ P” o n a nd |
Slide | Microphone “M” on by sliding the switches |
“+” terminal as shown above. Slide cover back | toward the dots. |
on. |
|
3 |
In the area covered by the wireless system, verify the receiver is receiving by observing its indicators (see receiver instructions for details).
4 |
With a small screwdriver, adjust transmitter mic level so the receiver's “AUDIO LEVEL” LED flashes only when speaking very loudly. If it flashes frequently, turn it counterclockwise. If it doesn't flash at all, turn it clockwise.
5 |
Adjust mixer/preamp/amplifier to its normal setting. Speak into mic. If necessary, adjust receiver's audio output level until wireless system volume matches wired system volume (see receiver instructions for details).
6 |
“ W a l k ” t h e c o v e r a g e a r e a t o c h e c k f o r problems. If there is a problem, check mic batteries (fresh?); ensure antennas aren't touching each other or any metal objects. Path between transmitter and receiver must be clear for proper operation.