Bogen MBS1000A specifications Description, Specifications, Impedance

Page 1

Model MBS1000A

Desktop

Paging Microphone

DESCRIPTION

The Bogen Model MBS1000A is a dual-impedance, uni-directional, dynamic desktop microphone with a rubberized finish for all industri- al and commercial public address and paging applications. The MBS1000A has a bottom-mounted slide switch for low- or high- impedance selection.The wide band frequency response is smooth and peak free, thereby providing a natural, highly-intelligible sound.

The microphone output provides a normally open switch closure pair that can be used to operate external equipment. When the micro- phone is activated using either the push-to-talk or lift-to-talk functions, the provided contact closes. The push-to-talk actuator bar includes a locking feature to allow the mic to remain active for extended periods. The lift-to-talk feature can be enabled or disabled using a bottom- mounted selector switch.

Four molded, non-skid, non-marring, and permanently resilient "feet" are located under the cast base.

SPECIFICATIONS

 

Element:

Dynamic

Polar Pattern:

Uni-directional

Frequency Response:

45 to 15,000 Hz

Output:

Hi-Z: -52 dB (0 dB = 1 volt/microbar)

 

Lo-Z: -72 dB (0 dB = 1 volt/microbar)

Impedance:

Hi-Z: 50,000 ohms, matches 50,000 ohms

 

or greater

 

Lo-Z: 500 ohms, matches 125 to 1000 ohms

Switch:

Push-to-talk and push-to-lock

Cable:

7-feet of four-conductor, two-shielded cable

 

(mic leads shielded, contacts not shielded)

Dimensions:

4-3/8" W x 9-3/8" H x 5-7/8" D

Product Weight:

1 lb.

Finish:

Black rubberized finish with die cast base

IMPEDANCE

The Bogen Model MBS1000A is a dual-impedance microphone. The high-impedance position is 50,000 ohms unbalanced and the low- impedance is 500 ohms balanced. The low-impedance position is rec- ommended for long cable length requirements. Cable lengths of 100 feet or more can be used in this position without loss of level or dete- rioration of high frequency response.

Printed in Korea.

0302

© 2003 Bogen Communications, Inc.

54-5901-02A

Specifications subject to change without notice.

Image 1
Contents Description SpecificationsImpedance Cable END Connections Frequency Response Graph Selectors and SwitchesPhasing Cable Connections
Related manuals
Manual 8 pages 18.82 Kb