CONTENTS
Description | 3 |
General Wiring Practice | 4 |
Mechanical Assembly | 5 |
Wiring instructions | 6 |
9 | |
Installation | 9 |
In Case of Trouble | 10 |
Part List | 11 |
Schematic Diagram | Back Cover |
S P E C I F I C AT I O N S
Power Output: | 35 watts continuous, 45 watts |
| IHFM Music Power (both channels) |
Frequency Response: | ±1db from 10 cps to 40,000 cps. |
Power Response: | 20 cps to 20,000 cps without |
| exceeding 1% distortion within |
| 1 db of 17,5 watts each channel. |
Intermodulation Distortion: | Less than 1% at 17,5 watts each |
| channel. Less than 0.1% at |
| average listening levels. |
Hum and Noise: | Inaudible; more than 80 db below |
| rated output. |
Sensitivity: | 1 volt input for 17.5 watts out- |
| put (each channel). |
Input Impedance: | 500,000 ohms. |
Output Impedance: | 8 and 16 ohms. |
Damping Factor: | 10 from 20 cps to 20,000 cps. |
Minimum Channel Separation: | 80 db. |
Power Consumption: | 100 watts, 50/60 cycle a.c. |
Tube Complements: | 7247 (2), 6BQ5/EL84/7189 (4), |
| silicon diodes (2). |
Size: | 4" high, 13" wide, 5½" deep. |
Shipping Weight: | 16 lbs. |