Specifications, Features | AKG Acoustics C 419 instruction

C 419

Wind Instrument Micromic

Description

The AKG C 419 is response tailored for use with both brass and woodwind instruments. The gentle low frequency roll-off compensates for proximity effect and the high frequency boost adds presence and clarity. Its hypercardioid polar pattern gives the C 419 additional isolation from floor monitors and other instruments.

The microphone is small, light weight, and can be easily clipped to the bell of an instrument. The flexible gooseneck allows for precise capsule placement, while the rubber-tipped clamp ensures secure mounting and protects the instrument from damage. The C 419 features a 10 ft. (3 meter) cable terminated with an XLR-M connector. It accepts phantom voltages over the range of 9 to 52 volts. The C 419 L is terminated with a TA3-F, mini-XLR connector compatible with AKG wireless bodypack transmitters or the optional, B 29 L battery operated phantom power supply.

Specifications

Transducer type:	Condenser pressure gradient
Frequency response	20 Hz - 20 kHz
Polar pattern:	Hypercardioid
Impedance:	200 ohms
Output connector:	XLR, mini XLR (C419/L)
Sensitivity:	7 mV/Pa; -43 dB (re 1 V)
Powering:	Phantom powering from 9 to 52 Vdc

Sound pressure level for 1% /3% THD: 126/130 dB

Size:	(7.1” x 1.4”) including clamp
	(180 mm x 35 mm)
Net weight:	5.1 oz. (141 g)
Shipping weight:	16.8 oz. (462 g)
Standard accessory	W 44 Windscreen

Optional Accessories: B 29 L Battery operated phantom power supply with a 2 input mixer.

(used with the C 419 L version) WMS 40, 80, 61, 81 wireless microphone system

(used with the C 419/L)

Features

•External shock mounting for excellent isolation

•Rubberized clamp for simple and secure mounting

•Miniature gooseneck extension for precise placement

•Adaptable to phantom powering or wireless operation

•Hypercardioid pattern for good isolation from other players and floor monitors