Hobart Welding Products OM-498 manual Specifications, Symbol Definitions

SECTION 2 – DEFINITIONS

2-1. Symbol Definitions

	Engine Choke		Read Operator’s	A	Amperes	V	Volts
			Manual
	Engine Oil		Fuel		Battery (Engine)		Engine
	Positive		Negative		Alternating Current		Output
					(AC)
h	Hours	s	Seconds		Time		Protective Earth
							(Ground)

Circuit Breaker

Temperature

SECTION 3 – SPECIFICATIONS

NOTE

This unit uses either a Kohler or a Honda engine. Differences between models are noted throughout this manual.

3-1. Weld, Power, And Engine Specifications

Welding	Weld	Rated	Maximum	Auxiliary	Fuel
	Output		Open Circuit			Engine
Mode		Welding Output		Power Rating	Capacity
	Range		Voltage
						Kohler CS8.5TG
						Air-Cooled,
						One-Cylinder,
		140 A, 25 V,			Kohler:	Four-Cycle,
		30% Duty Cycle		Single-Phase,	1.8 gal (6.9 L)	8.5 HP (300 CC),
CC/DC	40 – 140 A	100 A, 25 V,	70	3.5 kVA/kW	Tank	Gasoline Engine
		60% Duty Cycle		30/15 A,	Honda:	OR
				120/240 V AC,		Honda GX270
		80 A, 25 V			1.6 gal (6 L)
				60 Hz		Air-Cooled,
		100% Duty Cycle			Tank	One-Cylinder,
						Four-Cycle,
						9 HP (270 CC),
						Gasoline Engine

OM-498 Page 9