Hobart Welding Products OM-498 manual Installation, Installing Welding Generator

SECTION 4 – INSTALLATION

4-1. Installing Welding Generator

Movement	Airflow Clearance
		18 in
		(460 mm)
	18 in	18 in
		(460 mm)
	(460 mm)
	18 in	18 in
	(460 mm)
		(460 mm)
	Location
	OR
		install1 1/97 – 802 512-A / Ref. 151 556 / 158 936-A / S-0854

4-2. Grounding Generator To Truck Or Trailer Frame

Y Always ground generator frame to vehicle frame to pre- vent electric shock and static

		electricity hazards.
	1	Generator Base
	2	Metal Vehicle Frame
	3	Equipment Grounding
1	3	Terminal
	4	Grounding Cable
GND/PE	4
	Use #10 AWG or larger insulated
	copper wire.
OR	Y If unit does not have GFCI
		receptacles, use GFCI-
		protected extension cord.

Electrically bond generator frame to vehicle frame by metal-to-metal contact.

2 2

install1 1/97* – Ref. 151 556 / S-0854

OM-498 Page 13