AKG Acoustics manual Specifications C 414 XLS / C 414 XL

Specifications C 414 XLS / C 414 XL II

Type:	1-inch large-diaphragm pressure gradient microphone
Polar Pattern:	Omnidirectional, wide cardioid, cardioid, hypercardioid, figure eight
Sensitivity:	20 mV/Pa +/– 0.5 dB (-34 dBV)
Frequency range:	20 to 20,000 Hz (see frequency response traces)
Electrical impedance:	≤ 200 ohms
Recommended load impedance:	≥ 2.200 ohms
Bass cut filter slope:	12 dB/Octave at 40 and 80 Hz, 6 dB/Octave at 160 Hz, switchable
Preattenuation pads:	-6 dB, -12 dB, -18 dB, switchable
Equivalent noise level (CCIR 468-2):	20 dB (0 dB preattenuation)
Equivalent noise level IEC 60268-4 (A-weighted):	6 dB-A (0 dB preattenuation)
Signal-to-noise ratio re 1 Pa (A-weighted):	88 dB
Maximum SPL for 0.5 % THD:	140/146/152/158 dB SPL (0/6/12/18 dB Pad)
Dynamic range (A-weighted):	134/140/148/156 dB (0/-6/-12/-18 dB)
Environment:	Temperature range: -10° C to +60° C
Relative humidity:	95% (+20° C), 85% (+60° C)
Powering:	48 V Phantom power (IEC 61938)
Current Drain:	ca. 4.5 mA
Connector:	3-pin XLR to IEC
Dimensions:	50 x 38 x 160 mm (2.0 x 1.5 x 6.3 in.)
Net weight:	300 g (10.6 oz.)

This product conforms to standards EN 61 000-6:2001 and EN 61 000-6-3:2001.

Patents C 414 XLS: AT 395.225, DE 4.103.784, JP 2.815.488, Patents C 414 XL II: AT 395.225, DE 4.103.784, JP 2.815.488, AT 400.910

C 414 XLS C 414 XL II

Omnidirectional

Wide Cardioid

Cardioid

Hypercardioid

Figure-eight

AKG SOUNDS BETTER