Wharfedale SPX815, SPX613 EFX Effects Send, Monitor Send Controls, Power on LED This LED

Powered Mixers SPX613 & SPX815

LOW EQ control is centered at 80Hz. Stereo channels have two band equalization with the HI EQ

control is centered at 10kHz and the LOW EQ control is centered at 100Hz.

12

11. EFX (Effects) Send

Controls: Each EFX control is post

11	channel level and post EQ. Any
	changes made to the channel level
	and/or the equalizer section of a
10	channel will affect the EFX SEND
	signals. There is 15 dB of signal gain
	available for each EFX SEND knob.

9

8

7

6

3

2

1

12. MONITOR Send Controls:
The MON send control determines the
amount of signal that is fed to the
monitor buss. This control is Pre-fader
and derives its signal independent
from the channel level control. Any
5 changes made on the channel fader
do not affect the signal that is sent to
	,,	,,
the		MON buss. This send is
commonly used for a stage monitor
mix in sound reinforcement
4 applications.

	13. Power ON LED: This LED
SPX613 / SPX815 FEATURES	lights when the power is on for the
	mixer.

+12

+9

+6

+3

-3

-6

-9

-12

+12

+9

+6

+3

-3

-6

-9

-12

	14. EFX TO MAIN: This knob is
	the level control for the internal effects
13	unit and the EFX Return Jack (when
	an external device is connected to this
15	jack). This knob controls the amount of
	the effects signal that is mixed with the
		,,		,,
	unprocessed,		clean signal of the
	main mix.
14	15. EFX TO MONITOR: This knob
	is the level control for the internal
	effects unit and the EFX Return Jack
	(when an external device is connected
	to this jack) that is routed to the
	MONITOR buss of the mixer. This knob
	controls the amount of the effects
	signal that is mixed with the
		,,		,,
	unprocessed,			clean signal of the

SPX613 / SPX815 FEATURES

monitor mix.

,	Page 5
WHARFEDALE PRO SPX613 / SPX815 OWNER S MANUAL