Pioneer VSX-9100TX Erasing all of the remote control presets, Direct function

Page 52

09Controlling the rest of your system

Erasing one of the remote control button settings

This erases one of the buttons you have programmed and restores the button to the factory default.

1While pressing the RECEIVER button, press and hold the 1 button.

The remote LCD display shows SETUP.

2Press the MULTI CONTROL button corresponding to the button setting to be erased.

The LCD on the remote displays the component.

3 Use (cursor left/right) to select ERASE then press ENTER.

The LCD display flashes PRES KEY.

4Press and hold the button to be erased for two seconds.

The LCD display shows OK or NO CODE to confirm the button has been erased.

5Repeat step 4 to erase other buttons.

6Press the RECEIVER button when you’re done.

Erasing all of the remote control presets

This will erase all preset remote control preset codes and programmed buttons.

1While pressing the RECEIVER button, press and hold the 1 button.

The remote LCD display shows SETUP.

2Press the DVD/LD MULTI CONTROL button.

3 Use (cursor left/right) to select RESET then press and hold ENTER for about two seconds.

The LCD shows OK to confirm the remote presets have been erased.

Direct function

• Default setting: ON

You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component. This could let you, for example, use the remote control to set up and listen to a CD on the receiver and then use the remote control to rewind a tape in your VCR while you continue to listen to your CD player.

When direct function is on, any component you select (using the MULTI CONTROL buttons) will be selected by both the receiver and the remote control. When you turn direct function off, you can operate the remote control without affecting the receiver.

1While pressing the RECEIVER button, press and hold the 1 button.

The remote LCD display shows SETUP.

2Press the MULTI CONTROL button for the component you want to control.

The LCD on the remote displays the component you want to control.

3 Use (cursor left/right) to select DIRECT F then press ENTER.

The LCD on the remote displays the component you want to control.

4 Use (cursor up/down) to switch direct function ON or OFF then press ENTER.

The LCD shows OK to confirm the setting.

Note

•You can’t use direct function with the TV CONT function.

Confirming preset codes

Use this feature to check which preset code is assigned to a MULTI CONTROL button.

1While pressing the RECEIVER button, press and hold the 1 button.

The remote LCD display shows SETUP.

2Press the MULTI CONTROL button of the component for which you want to check the preset code.

3 Use (cursor left/right) to select READ ID then press ENTER.

The brand name and preset code appears in the display for three seconds.

52

En

Page 51 Page 53
Image 52
Page 51 Page 53
Contents VSX-9100TX Wash hands after handling Information to UserImportant Safety Instructions Contents Other Settings Controlling the rest of your systemOther connections Additional informationFeatures Before you startBefore you start Chapter Checking what’s in the boxBefore you start Ventilation Installing the receiverLoading the batteries Minute guide 02 5 minute guide ChapterIntroduction to home theater Listening to Surround SoundPowered subwoofer Minute guideFront speakers Surround speakers02 5 minute guide Make sure ‘Normal SB’ is selected then press EnterFollow the instructions on-screen Other problems when using the Auto Mcacc Setup Checking the settings on your DVD or other playerPlaying a source Connecting up Chapter Connecting upAbout cable types Connecting up About the video converterConnecting up Connecting digital audio components CD recorder DVD or LD player CD playerConnecting up Connecting analog audio components Connecting multichannel analog componentsOutput jacks TipConnecting up Connecting video components Connecting to the front panel video terminalTV tuner DVD or LD playerConnecting up Connecting antennas FM wire antennaUsing external antennas AM loop antennaConnecting the speakers Front speakersOverhead view of speaker setup Hints on speaker placementConnecting up Power cord cautionView of 7.1 channel speaker setup AC outletListening Mode Select Controls and displaysControls and displays Chapter Front panelControls and displays Controls and displays Display Stereo MonoTuned SleepControls and displays Remote control 6TUNE/ST +/- /ENTER DTV ON/OFFDTV Info Tuner DisplayOperating range of remote control unit Listening to your system Listening to your system ChapterListening in surround sound Auto playbackUsing the Home THX modes Using the Advanced surround effectsListening to your system PRO LogicDolby Pro Logic IIx Music settings Neo6 Music settingsUse the +/- buttons to adjust the setting Press EFFECT/CH SEL again to adjust other settingsChoosing the input signal Listening to your system Listening with Acoustic CalibrationListening to your system Using the surround back channel Extended modePress Extended Mode front panel repeatedly To cycle the surround back channel optionsListening to your system Using the Virtual Surround Back Mode VirtualSBUsing the tone controls Press SHIFT+DIALOG E to switch dialog enhancement on or offPress Tone to select the frequency you want to adjust Enhancing dialogUsing the sleep timer Listening to your system Playing other sourcesSelecting the multichannel analog inputs 30 minSystem Setup menu System Setup menu ChapterMaking receiver settings from the System Setup menu Surround back speaker settingSystem Setup menu Manual Mcacc speaker setupSelect the surround back speaker setting Select ‘MANUAL MCACC’ from the System Setup menuFine Channel Level Fine Channel DistanceCopying your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ automaticallyAcoustic Calibration EQ Checking your Acoustic Calibration EQ settings Setting the Acoustic Calibration EQ manuallyFront Align Select the setting you want to check Manual speaker setupSelect ‘Manual SP Setup’ then press Enter Speaker Setting Select ‘Speaker Setting’ from the Manual SP Setup menuCrossover Network Channel LevelSelect ‘Speaker Distance’ from the Manual SP Setup menu Speaker DistanceUsing the tuner Using the tuner ChapterTuning directly to a station Listening to the radioUsing the tuner Saving station presets Naming station presetsListening to station presets AbcdefghijklmnopqrstuvwxyzMaking recordings Making recordings ChapterMaking an audio or a video recording Prepare the recorderSetting the remote to control other components Selecting preset codes directlyControlling the rest of your system Controlling the rest of your system ChapterUse cursor left/right to select Learn then press Enter Press the Receiver button to exit and store the operationsConfirming preset codes Erasing all of the remote control presetsDirect function Controlling the rest of your system Controls for TVs InputSelect DiscCD/MD/CD-R/DVD/LD SHIFT+Controlling the rest of your system Enter GuideHDD Shift + DVDSecond Zone speaker B setup Switching the speaker systemOther connections Other connections ChapterOther connections Bi-amping your front speakers Bi-wiring your speakersFront left Speaker Using the sub room controls Using the remote control in the sub roomOther connections Multi-room listening Making multi-room connectionsUsing the front panel multi-room controls Use the Master Volume dial to adjust the volumeOther connections Press the Multi Room ON/OFF button on the front panelOther connections Connecting additional amplifiers Using this receiver with a Pioneer plasma displayPioneer plasma Using the SR+ mode with a Pioneer plasma displayDVD player Page Other Settings Other Settings ChapterInput Assign menu Assigning the digital inputsOther Settings Other Setup menuSelect ‘Other Setup’ then press Enter Assigning the component video inputsDynamic Range Control Setup Dual Mono SetupSelect ‘DRC Setup’ from the Other Setup menu Choose the setting that you wantLFE Attenuator Setup SR+ Setup for Pioneer plasma displaysSelect ‘LFE ATT Setup’ from the Other Setup menu Select ‘SR+ Setup’ from the Other Setup menuMulti Room Setup Volt Trigger SetupTroubleshooting PowerAdditional information Additional information ChapterAdditional information No soundOther audio problems Digital inputs onVideo Audio components onSettings DisplayRemote control Extended Auto setting, the EXSwitching the speaker impedance Additional information Resetting the main unitPress System Setup to confirm Additional information Surround sound formats DolbyAdditional information About THX Additional information Specifications Cleaning the unitOnce you have established a comfortable sound level To establish a safe levelDecibel Level Example Pioneer Corporation

VSX-9100TX specifications

The Pioneer VSX-9100TX is a powerful and versatile surround sound receiver that has garnered a strong reputation among audio enthusiasts since its release. Designed to cater to the needs of home theater aficionados, the VSX-9100TX comes packed with features and technologies that elevate the listening experience, making it a noteworthy addition to any audio setup.

One of the standout characteristics of the VSX-9100TX is its robust amplification capabilities. The receiver boasts a 7.1 channel output, delivering an impressive total power of 100 watts per channel. This means that users can experience rich, dynamic sound across multiple audio channels, making it an excellent choice for immersive movie watching or music listening.

Incorporating Dolby Digital EX and DTS-ES technologies, the VSX-9100TX ensures that users can revel in high-quality surround sound, regardless of the source material. This versatility allows for seamless playback of both stereo and multi-channel audio formats, allowing for an expansive soundstage that enhances the overall experience.

Another essential feature of the VSX-9100TX is its advanced room calibration technology. The built-in MCACC (Multi-Channel Acoustic Calibration System) optimizes sound output by analyzing the room's acoustics and adjusting the speaker settings accordingly. This results in a more balanced and natural sound that adapts to your specific environment, ensuring that every listener can enjoy optimal audio quality.

Connectivity options are plentiful with the VSX-9100TX, featuring multiple HDMI inputs, component video inputs, and analog audio inputs, making it highly adaptable to various media sources. Additionally, the receiver supports video upscaling, allowing users to enhance the quality of standard-definition sources to a higher resolution for improved viewing experiences.

The VSX-9100TX also includes a user-friendly interface, allowing easy navigation through its array of settings and features. The remote control provides intuitive access to various functions, making it convenient for users to switch between inputs, adjust volume, or engage different sound modes with ease.

In conclusion, the Pioneer VSX-9100TX stands out with its impressive amplification, cutting-edge audio technologies, and user-friendly features. Whether for movies, music, or gaming, this receiver is designed to deliver an exceptional audio experience, setting a standard that resonates with audiophiles and casual listeners alike. Its combination of power, versatility, and advanced sound calibration makes it a compelling choice for anyone looking to enhance their home theater system.
Top Page Image Contents