Astatic 930VPW manual Specifications for 930VP

Specifications:

Type:

Electret Condenser Microphone

Polar Pattern:

Cardioid / Omni-Directional / Figure 8, Continuously Variable

Frequency Response:

40Hz - 15KHz

Sensitivity:

-32dBV (25mV) @ 1Pa

Rated Impedance:

330 ohms

Equivalent Noise Level:

<26dB-A

Maximum SPL:

118dB

Signal To Noise Ratio:

>68dB

Power Supply:

48V phantom

Current Consumption:

6mA

Connector:

Mini XLR

External Size:

5 1/2 (140mm) x 3 1/2 (89mm) x 15/16 (24mm)

Weight:

180g

SPECIFICATIONS FOR 930VP

	0
30	30
60	60
90	90
	-25
	-20
	-15
120	120
	-10

-5

150150

180

Cardioid	100Hz	Figure 8
	1KHz	0
	30	30
	60	60
	90	90
		-25
		-20
		-15
	120	120
		-10

-5

150150

180

		Omnidirectional					100Hz
							500Hz
							1KHz
	Cardioid
IN dB	+10
	0
				Hi-Pass
	-10
RESPONSE
	-20
	-30
	10	50	100		500			1K	5K	10K	20K
						FREQUENCY IN HERTZ

Architect's and Engineers' Specification

The microphone shall be an ASTATIC 930VP. The microphone shall be a miniature dual electret boundary microphone. The frequency response will be 40Hz - 15KHz. The microphone shall have a continuously adjustable polar pattern.

The output level of the 930VP shall be -32dBV (25mV) @ 1Pa. The microphone will have a miniature 3 pin connector and be supplied with a 30 foot cable that has a mating connector on one end and a professional 3 pin XLR type connector on the other end. The microphone shall have a switch selectable high pass filter with -3dB at 80 Hz and slope of 12dB per octave when enabled. The microphone shall have a locally controlled mute that will provide greater than 60dB of attenuation when enabled. The mute shall be configurable for normally muted / momentary push-to-talk, normally on / momentary push-to-mute or latch on / latch off operation. When configured for latch on / latch off operation, the microphone shall be configurable to either power up on or power up off. The microphone shall have a red LED that will indicate if the microphone is on or off. The microphone will operate from standard 48V phantom power with a current consumption of less than 6 mA.

The dimensions of the microphone shall be 5 1/2" long, 3 1/2" wide, and 15/16" high. The weight shall be 4.6 oz not including the cable. The microphone will have a durable urethane painted finish. The microphone will be black with a black cable or white with a white cable.

The ASTATIC Model 930VP is specified.

Figure 8

	+10
IN dB	0
	-10
RESPONSE
	-20
	-30

10 50 100 500 1K 5K 10K 20K

FREQUENCY IN HERTZ

Omnidirectional

	+10
IN dB	0
	-10
RESPONSE
	-20
	-30

10 50 100 500 1K 5K 10K 20K

FREQUENCY IN HERTZ

TWO-YEAR LIMITED WARRANTY

ASTATIC Microphones are warrantied for two years to the original purchaser from the date of purchase by Omnitronics, LLC to be free from defects in material and workmanship. In event of such defect, product will be repaired or replaced at Omnitronics, LLC discretion with a new unit of equal or superior value. This will be at no charge if delivered prepaid to Omnitronics, LLC, together with the proof of purchase and a Return Authorization number. The unit will be returned promptly prepaid. Warranty excludes exterior finish, appearance items, or malfunction due to abuse or operation under other than specified conditions. Consequential or incidental damages are excluded.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations maynotapplytoyou.

Note: No other warranty, written or oral is authorized by Omnitronics, LLC.

SHIPPING INSTRUCTIONS

Pleasecallourcustomer service department at 440-593-1111 for a pre-approved returnauthorizationnumber and carefullyrepack the unit and return it to: Omnitronics, LLC, 341 Harbor St., Conneaut, OH 44030

ALL RETURNS MUST HAVE A PRE-APPROVED RETURN AUTHORIZATION NUMBER OR IT WILL BE REFUSED.

If outside the United States, contact your dealer or distributor for warranty details.

46873-23-00 / Rev.2 / 3/3/05 / S.L.W.