Astatic 727-18 manual Specifications†, RoHS Compliant, Optional Accessories 40-340

727-18

Cardioid Dynamic Mini-gooseneck Microphone

Specifications†
Operating Principle	Moving Coil Dynamic
Polar Pattern	Cardioid
Frequency Response	200Hz - 16KHz
Sensitivity	-56dBV (1.6mV) @ 1Pa
Impedance	600 ohms
Connector	3-pin male XLR type
Polarity	Positive pressure on diaphragm
	corresponds to positive voltage
Finish	on pin 2 relative to pin 3.
	Durable matte-black urethane
Dimensions	(See drawing)
Net Weight [Mass]	6.3oz [0.18Kg]
Packaged Weight [Mass]	9.0oz [0.26Kg]
RF Immunity	Meets or exceeds EN55103-2,
RoHS Compliant	E1, E2, E3 and E4.

†Specifications subject to change without notice.

Optional Accessories

40-340	............................................Flex pipe stiffening collar
FM-1A	................Flange with 3-pin female XLR stem mount
FM-2A	............Locking flange mount with 3-pin female XLR
GSM-1	..............................................................Shock mount

Architects’ and Engineers’ Specification

The microphone will be a miniature-gooseneck dynamic type utilizing neodymium magnetics. The frequency response will be 200Hz - 16KHz. The microphone will have a cardioid polar pattern. The sensitivity of the microphone will be -56dBV (1.6mV) @ 1Pa. The impedance of the microphone will be 600 ohms. The gooseneck will be 5/16" [8mm] in diameter. The microphone will have a 3-pin male XLR-type output connector which also serves as the microphone mount. The microphone will be RoHS compliant and will meet or exceed EN55103-2, E1, E2, E3 and E4.

The dimensions of the microphone will be 1-3/16" [30mm] in diameter for the head, and 3/4" [19mm] in diameter for the connector. The gooseneck of the 727-18 will be 5-16"

[8mm] in diameter. The overall length will be 18" [457mm]. The net weight will be 6.3oz [0.18Kg]. The packaged weight will be 9.0oz [0.26Kg]. The 727-18 will have a durable matte-black urethane finish. The Astatic 727-18 is specified.

Frequency Response

Polar Pattern

Two-Year Limited Warranty

Astatic Commercial Audio Products hereby warrants that this product will be free of defects in material and workmanship for a period of two years from the date of purchase. In the unlikely event that a defect occurs Astatic will, at its option, either repair or replace with a new unit of equal or greater value. Retain proof of purchase to validate the purchase date and return it with any warranty claim.

This warranty excludes exterior finish or appearance, damage from abuse, misuse of the product, use contrary to Astatic’s instructions or unauthorized repair. All implied warranties, merchantability, or fitness for a particular purpose is hereby disclaimed and Astatic hereby disclaims liability for incidental, special or consequential damages resulting from the use or unavailability of this product.

This warranty gives you specific legal rights and you may have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you.

Note: No other warranty, written or oral is authorized by Astatic Commercial Audio Products.

Shipping Instructions

Please call our customer service department at 440-349-4900 for a pre-approved return authorization number.

Carefully repack the unit and return the Iinsured package to: Astatic Commercial Audio Products, 6573 Cochran Road, Building , Solon, Ohio 44139.

RETURNS WITHOUT A PRE-APPROVED RETURN AUTHORIZATION NUMBER WILL BE REFUSED.

If outside the United States, contact your local dealer or distributor for warranty details.

©2007 Astatic Commercial Audio Products

Part No. 46873-88-00 Oct2007

Astatic CommercialI Audio Products 6573 Cochran Rd. Building Solon, Ohio 44139 U.S.A.

Tel: (440) 349-4900 Fax: (440) 248-4902 Sales: (800) 421-3161 www.astaticinstalled.com