Specifications
GENERAL
Power consumption: | 30 W |
Power consumption in standby mode: |
|
Approx. 0.2 W
Power supply:
(Continental Europe, Australia and New Zealand)
AC 220 V to 240 V, 50 Hz
(Others)
AC 110 V to 127 V/220 V to 240 V, 50/60 Hz
Dimensions (WkHkD): (Without wall mount bracket)
800 mmk108 mmk58 mm (With wall mount bracket)
800 mmk108 mmk80 mm
Mass:
(Without wall mount bracket)
Approx. 3.2 kg
(With wall mount bracket)
Approx. 3.3 kg
Operating temperature range:
0 oC to r40 oC
Operating humidity range:
20 % to 80 % RH (no condensation)
AMPLIFIER SECTION
RMS Output Power
Front ch:
30 W per channel (4 ≠), 1 kHz, 10 % THD
Subwoofer ch:
30 W per channel (4 ≠), 100 Hz, 10 % THD
Total RMS Dolby Digital mode power:
120 W
(Except Continental Europe, Australia and
New Zealand)
PMPO Output Power:
980 W
SPEAKER SECTION
FRONT SPEAKERS
Type: 1 way, 1 speaker system (Bass Reflex)
Full range: | 6.5 cm Cone typek2 |
SUBWOOFER |
|
Type: 1 way, 1 speaker system (Bass Reflex)k2
Woofer:8 cm Cone typek2
TERMINAL SECTION
HDMI
This unit supports “HDAVI Control 5” function.
HDMI input |
|
Input connector: | Type A (19 pin) |
HDMI AV output |
|
Output connector: | Type A (19 pin) |
Digital Audio Input (TV only) |
|
Optical digital input: | Optical terminal |
Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz
Audio Format: | LPCM, Dolby Digital |
IR Blaster |
|
Terminal 1: | 3.5 mm jack |
|
|
1Specifications are subject to change without notice. Mass and dimensions are approximate.
2Total harmonic distortion is measured by a digital spectrum analyzer.
Audio information
∫Compatible audio formats
This unit is compatible with the following formats:
Dolby Digital, DTS Digital Surround,
≥When using the optical digital audio cable, this system is not able to play audio with a sampling frequency greater than 48 kHz.
(Sound Effect and Dolby Virtual Speaker will be automatically cancelled if the audio signal’s sampling frequency is greater than 48 kHz.)
Operating Instructions
15
