Standard Features

English

 

Active Resonance Control

Active Resonance Control (ARC). This patent pending circuitry compensates for the resonance created when installing midbass or midrange speakers in the kick panels or lower door areas of a vehicle.

Fully Regulated PWM Power Supply

All Xtant “A” Series amplifiers feature a Fully Regulated, Pulse Width Modulated power supply. This supply technology provides high efficiency and consistent output performance even when battery voltage is less than optimum.

Crossover

A 12dB High Pass or 24dB Mono Low Pass Crossover is variable from 40-120Hz, and is built into the circuit board of the A2002 and A4004 amplifiers.

Balanced/Floating Input

When enabled, this circuitry helps to eliminate “system noise” associated with “ground loops”. When combined with the input sensitivity adjustment, it allows the amp to accept up to 17V of input signal. Balanced must be used for BTL inputs using the HLA.

Protection Circuitry

Both Thermal and Overcurrent protection are incorporated into the “A” Series Amplifiers. In the event of a problem, the amplifier will reduce its power to maintain operation.

Status LEDs (Located on the top of the amplifiler)

Three LEDs, indicate operational status of all Xtant A Series amplifiers. The red LED illuminates when the amplifier is “ON”, the yellow LED indicates that overcurrent protection is engaged, the orange LED indicates that the thermal protection circuit is engaged.

Optional Performance Upgrades

High Level Adapter (HLA)

This adapter allows you to connect a source unit with speaker level outputs to your Xtant amplifier.

English

Xtant A2002 Specifications

 

 

 

 

Frequency Response:

 

20 Hz to 20 kHz +/– 1 dB

Number of Channels:

 

 

2

Watts per Channel @ 4Ω

:

 

2 x 50

Watts per Channel @ 2Ω

:

 

2 x 100

Bridged Mono @ 4Ω :

 

 

1 x 200

Recommended Load:

 

≥ 2Ω Stereo / ≥ 4Ω

Bridged

Distortion (THD):

 

 

≤ .1%

Measured: 20 Hz to 20 kHz at rated power, all channels driven 4Ω

Signal to Noise Ratio:

 

 

≥ 100 dB

Measured: A-weighted in 20 kHz noise bandwidth @ 1 volt sensitivity

Damping Factor:

 

≥ 200 @ 100 Hz with 4Ω load

Input Sensitivity:

 

100 mV to 8.5 V RMS Unbalanced

 

 

 

200 mV to 17 V RMS

Balanced

Input to Line Output Gain:

 

 

0 dB

On-Board Crossover:

 

12dB HP/24dB Mono LP

Balanced Line:

 

 

On Board

Power Supply:

 

Fully Regulated, PWM

Operational Voltage:

 

10 to 16 Volts

Fusing Requirement:

 

 

30 Amp

Size (L xW x H):

 

11-5/8” x 9-1/4” x 1-7/8”

 

 

 

295mm x 235mm x 47mm

A.R.C.:

 

 

0-12dB Level Adjustment

Warranty:

 

 

Limited 4 Year Parts and Labor

 

 

 

(see page 8 for details)

4

5

Page 4
Image 4
Xtant A4004 owner manual Standard Features, Xtant A2002 Specifications

A2002, A4004 specifications

The Xtant A4004 and A2002 are cutting-edge audio amplifier models designed for high-performance sound systems in both mobile and stationary applications. These amplifiers are recognized for their outstanding audio quality, advanced technologies, and user-friendly features that appeal to both audiophiles and everyday users.

The Xtant A4004 is a four-channel amplifier, capable of delivering a powerful output of 100 watts per channel at 4 ohms, with an impressive performance that makes it suitable for driving multiple speakers. It features a Class A/B topology which strikes an excellent balance between power efficiency and audio fidelity, ensuring low distortion and dynamic sound reproduction. This amplifier also incorporates a high-speed MOSFET power supply, providing increased efficiency and allowing for consistent performance even under demanding conditions.

Another standout feature of the A4004 is its adjustable crossover network, enabling users to tailor the frequency response to their specific setup. With both high-pass and low-pass filters, the amplifier can seamlessly integrate with subwoofers and full-range speakers, ensuring an immersive audio experience. Furthermore, the inclusion of line-level and speaker-level inputs makes the A4004 versatile enough to fit into a variety of installations, whether it's a factory system upgrade or a complex custom build.

On the other hand, the Xtant A2002 is a two-channel amplifier that offers remarkable output power of up to 125 watts per channel at 4 ohms. It is designed for those looking for a smaller footprint without compromising sound quality. The Class D architecture allows for a lightweight and compact design while still delivering robust performance, making the A2002 an excellent choice for space-constrained environments.

The A2002 also features a built-in variable crossover, providing the flexibility to optimize audio performance based on user preferences. Its sophisticated thermal management system ensures reliable operation over extended periods, protecting the amplifier from overheating during intense listening sessions.

Both models come with a range of protective features, including short-circuit, thermal, and overload protection, ensuring longevity and reliability under various operating conditions. Additionally, the amplifiers are designed with a sleek and modern aesthetic, making them visually appealing for any installation.

In summary, the Xtant A4004 and A2002 amplifiers stand out for their impressive power, advanced technology, and user-friendly features. These amplifiers not only enhance audio quality but also offer flexibility in installation and use, catering to the diverse needs of audio enthusiasts.