Sound Performance Lab Parametric Equalizer owner manual Phase Measurements

Page 22

Fig. 15:

Curve 1:

Low-pass, Q = 1,5;

Roll-Off = gentle

Curve 2:

Low-pass; Q = 1,5;

Roll-Off = steep

PHASE

MEASUREMENTS

The following measurements show that the Optimizer´s phase response is very stable at high amplitudes.

The doted line in fig. 16 illustrates the frequency response from 0Hz to 200kHz for two combined equalizers (band 1 and 2). The solid line shows the phase reponse with only 2° diver- tion at 20kHz!

A broad frequency range has become a major demand for

Fig. 16:

Doted line :

Frequency response

Solid line :

Phase response

Measurements at Q = 1.0;

Frequency = 1kHz; Boost/Cut

=0dB; Frequency range:

34-7100Hz

22

OPTIMIZER

Image 22
Contents Optimizer Page Contents Introduction OptimizerIntroduction Optimizer Connectors InstallationOperating Level Power Supply Input- & output Specifications Rear PanelSET-UP Applcations Mastering With OptimizerOptimizer Used Inserts Controls Front PanelMaster EQ DualActive PeakBOOST/CUT ROLL-OFF Bandwidth Ontrols CFrequency Freq . RangeFrequency control Hz will set the center-frequency Output Notch Parametric Highpass Bandpass Lowpass Conttols Phase Measurements Phase Measurements Noise Measurements Common Mode Rejection Limited Warranty Sound Performance Laboratory