Sound Performance Lab Parametric Equalizer owner manual Phase Measurements

Page 23

equalizers in modern recording technology. The Optimizer has an extremely broad frequency response from 0Hz to 200kHz that guaranties that the Optimizer´s filters operate with maximum tonal flexibility and without technically induced limitations.

Fig. 17:

Curve 1:

Frequency response; 1kHz Curve 1a :

Phase response

Curve 2:

Frequency response; Notch 1kHz Curve 2a :

Phase response

Measurements at Q = 1.0; Boost/Cut = +12dB

Fig. 18:

Band-pass

Dotted line:

Frequency response

Solid line:

Phase response

Messungen bei Q = 1.5; Frequenz = 1kHz; Boost/Cut = +12dB

Fig. 19:

Four filter stages in series

Dotted line:

Frequency response

Solid line:

Phase response

Boost/Cut = 12dB

PHASE MEASUREMENTS

OPTIMIZER

Image 23

Contents Optimizer Page Contents Optimizer IntroductionIntroduction Optimizer Operating Level InstallationConnectors Power Supply Rear Panel Input- & output SpecificationsMastering With Optimizer SET-UP ApplcationsOptimizer Used Inserts Front Panel ControlsPeak DualActive Master EQBOOST/CUT ROLL-OFF Ontrols C BandwidthFreq . Range FrequencyFrequency control Hz will set the center-frequency Output Notch Parametric Highpass Bandpass Lowpass Conttols Phase Measurements Phase Measurements Noise Measurements Common Mode Rejection Limited Warranty Sound Performance Laboratory