Sound Performance Lab 9737 manual Model, By Hermann Gier Version 1.3 1/1999

Page 2

SOUND PERFORMANCE LAB

MACHINE HEAD

MODEL 9737

Manual

by Hermann Gier Version 1.3 – 1/1999

The information in this document has been carefully verified and is assumed to be correct. However Sound Performance Laboratory (SPL) reserves the right to modify the product described in this manual at any time. Changes without notice. This document is the property of SPL and may not be copied or reproduced in any manner, in part or full without the autho- rization of SPL.

Limitations of Liability:

In no event will SPL be liable for any damages, including loss of data, lost profits, cost of cover or other special, incidental, consequential or indirect damages arising from the use of the unit, however caused and on any theory of liabi- lity. This limitation will apply even if SPL or an authorized dealer has been advised of the possibility of such damage.

SPL electronics GmbH

P.O. Box 12 27

D- 41368 Niederkruechten, Germany

Phone: +49 - 21 63 / 9 83 40

Fax: +49 - 21 63 / 98 34 20

eMail: info@spl-electronics.com

www.spl-electronics.com

©1999 SPL electronics GmbH. All Rights Reserved.

Image 2
Contents Machine Head Model By Hermann Gier Version 1.3 1/1999We wish you every success with the Machine Head Contents Foreword ThanksSpecifications Warranty Dear customer Machine Head IntroductionOperation Safety Indicators and metersConnections Installing UpdatesIf an error occurred during download the LC-display says All controls are in the start-off positions Quick StartAnalogue Tape Press ACTIVE. LED illuminatesDrive Control ElementsActive Machine HF-AdjustHF-ADJUSTcontrol allows you to control the amount LED chains Output GainLC-display It is variable between -12dB and +12dB in 0.1dB stepsPresets Software version and date Selecting inputs InfoDepressing Store and Apply simultanouesly for about one AES/EBU input detectedDisplaying the Channel Difference Error flag Displaying the Audio-Error flagDisplaying the CRC-Error flag Setting or erasing the Copy-Prohibit flagSelecting a serial port Displaying the Emphasis flagNo = no emphasis YES = with emphasis Selecting a Midi channelSpecifications Input/OutputWarranty