Revolabs 02-HDSGL, 04-HDDUALEU, 04-HDSGLEU, 02-HDDUAL Using the HD XLR Microphone Wireless Adapter

3.With the microphone in position, un-mute the microphone by pressing and releasing the Mute button (confirm by a flashing GREEN LED).

4.To turn microphone off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED and release button.

If the microphones are placed too far from the Base Station (~65 feet or 20 meters) the connection will be dropped (LED flashes all colors) and the microphone will mute. After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to indicating it’s out of range.

Move the microphone closer to the Base Station and the connection will automatically be re- established to its original state, and the beeping will cease. If not, the microphone will continue beeping until it turns off in about 15 minutes.

Using the HD XLR Microphone Wireless Adapter

The HD Wireless XLR Adapter for Handheld Microphone, shown in the following figure, connects to a handheld dynamic microphone for wireless freedom during open mic meetings, Q&A sessions, classrooms, etc.

5

4

3

1

2

1.Audio Out port — accepts the 2.5mm plug for the earpiece.

2.Charging Port — docks to all Revolabs HD Charger Bases.

3.Mute button — press to mute, un-mute and pair microphone.

4.LED display — visual status for mute, un-mute, and pairing.

5.XLR Female connector — balanced audio for dynamic microphones.

To use the HD Universal Wireless Adapter:

1.Remove the Microphone Adapter from the Charger Base.

The adapter turns on and mutes automatically when removed from Charger Base (flashing RED LED). The XLR Microphone Adapter is attached to a standard dynamic microphone to convert it from a wired microphone to a wireless microphone (see following figure).

- 11 -