Pioneer VSX-521-K operating instructions Making cable connections, Hdmi cables, About Hdmi

Page 12

02Connecting your equipment

Making cable connections

Make sure not to bend the cables over the top of this unit (as shown in the illustration). If this happens, the magnetic field produced by the transformers in this unit may cause a humming noise from the speakers.

Important

•Before making or changing connections, switch off the power and disconnect the power cord from the AC outlet.

•Before unplugging the power cord, switch the power into standby.

HDMI cables

Both video and sound signals can be transmitted simultaneously with one cable. If connecting the player and the TV via this receiver, for both connections, use HDMI cables.

Be careful to connect the terminal in the proper direction.

Note

•Set the HDMI parameter in Setting the Audio options on page 28 to THRU (THROUGH) and set the input signal in Selecting the audio input signal on page 21 to HDMI, if you want to hear HDMI audio output from your TV (no sound will be heard from this receiver).

•If the video signal does not appear on your TV, try adjusting the resolution settings on your component or display. Note that some components (such as video game units) have resolutions that may not be displayed. In this case, use a (analog) composite connection.

•When the video signal from the HDMI is 480i, 480p, 576i or 576p, Multi Ch PCM sound and HD sound cannot be received.

About HDMI

The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio that the connected component is compatible with, including DVD- Video, DVD-Audio, SACD, Dolby Digital Plus, Dolby TrueHD, DTS-HD Master Audio (see below for limitations), Video CD/ Super VCD and CD.

This receiver incorporates High-Definition Multimedia Interface (HDMI®) technology.

This receiver supports the functions described below through HDMI connections.

•Digital transfer of uncompressed video (contents protected by HDCP (1080p/24, 1080p/60, etc.))

•3D signal transfer

•Deep Color signal transfer

•x.v.Color signal transfer

•Audio Return Channel

•Input of multi-channel linear PCM digital audio signals (192 kHz or less) for up to 8 channels

•Input of the following digital audio formats:

– Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio (Dolby TrueHD, DTS-HD Master Audio), DVD- Audio, CD, SACD (DSD 2 ch only), Video CD, Super VCD

•Synchronized operation with components using the Control with HDMI function (see Control with HDMI function on page 34)

Note

•Use a High Speed HDMI® cable. If HDMI cable other than a High Speed HDMI® cable is used, it may not work properly.

•When an HDMI cable with a built-in equalizer is connected, it may not operate properly.

•3D, Deep Color, x.v.Color signal transfer and Audio Return Channel are only possible when connected to a compatible component.

•HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the audio may occur when switching between audio formats or beginning playback.

•Turning on/off the device connected to this unit’s HDMI OUT terminal during playback, or disconnecting/ connecting the HDMI cable during playback, may cause noise or interrupted audio.

HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries.

“x.v.Color” and

are trademarks of Sony

Corporation.

12

En

Page 11 Page 13
Image 12
Page 11 Page 13
Contents VSX-521-K Information to User Risk of Electric Shock Do not OpenThis Class B digital apparatus complies with Canadian Ices Important NoticeContents Flow of settings on the receiver Installing the receiverAutomatically setting up for surround sound Mcacc Before you startControls and displays ChapterFront panel Selects an input source0101 DisplayRemote control  ReceiverOperating range of remote control Loading the batteries12  Source Connecting your equipment Hints on the speaker placementPlacing the speakers Connecting the speakers Bare wire connections0202 123Making cable connections Hdmi cablesAbout Hdmi About video outputs connection Analog audio cablesVideo cables Hdmi OUTConnecting a TV and playback components Connecting using HdmiSelect one Connecting a satellite receiver or other digital set-top box Connecting your component with no Hdmi terminalUsing the component video jacks Component Video in 1 DVD Component Video in 2 DVR/BDRSee The Input Assign menu on page 32 for more on this HDD/DVD recorder, Blu-rayConnecting other audio components Connecting optional Bluetooth AdapterConnecting antennas Connecting to the front panel audio mini jack Using external antennasPlugging in the receiver Basic Setup Canceling the demo displayAutomatically setting up for surround sound Mcacc 0303Other problems when using the Auto Mcacc setup Confirm the speaker configurationWait for the test tones to finish Make sure ‘OK’ is selected, then press EnterBasic playback 0404Playing a source Bluetooth Adapter for Wireless Enjoyment of Music Wireless music playTip Pairing blinks Remote control operationPress Adapter to switch the receiver to Adapter input Start playback of music contents stored in BluetoothSaving station presets Listening to station presetsNaming preset stations Listening to the radioChoosing the listening mode Listening mode is shown on the display on the front panelListening to your system 0505Using the Sound Retriever Using the Advanced surround ADV SurrUsing Stream Direct AUTO/ Auto Surround Listening with Acoustic Calibration EQBetter sound using Phase Control Using surround back channel processingSetting the Up Mix function Each press cycles through the options as followsSetting the Audio options Dual MONOdPress Return to confirm and exit the menu Midnight /LOUDNESS aSelect the audio input signal if necessary Making an audio or a video recordingTune to the radio station, load the CD, video, DVD etc Prepare the source you want to recordSystem Setup menu Using the System Setup menuManual speaker setup Manual SP Setup0606 Crossover NetworkChannel Level Default settings Input Assign menuSpeaker Distance Component-1DVD Component-2DVR DVR/BDRPre Out Setting Auto Power Down menuFL Demo Mode menu You return to the System Setup menuHdmi Setup Synchronized amp modePower synchronization with TV Automatic switching of inputs Control with Hdmi functionBefore using synchronization Power synchronization with TVSelect the ‘ARC’ setting you want 0707Troubleshooting Additional informationGeneral 0808 HdmiImportant information regarding the Hdmi connection Resetting the main unit Cleaning the unitSpecifications Safety of Your Ears is in Your Hands Set your volume control at a low settingLimitedwarranty Garantie USA/Aux Etats-Unis Canada/Aux Canada

VSX-521-K specifications

The Pioneer VSX-521-K is a versatile and high-performance AV receiver designed to enhance your home entertainment experience. This model stands out for its impressive array of features, delivering robust audio and video capabilities, making it an ideal choice for audiophiles and casual listeners alike.

One of the key characteristics of the VSX-521-K is its 5.1 channel surround sound capability, providing an immersive experience that draws you into your favorite movies and music. With a total power output of 100 watts per channel, it ensures clear and potent sound reproduction that can fill large rooms without distortion. This model supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, which offer high-definition audio that brings cinematic experiences to life.

The technology behind the VSX-521-K also includes advanced audio processing features. The receiver incorporates Pioneer's proprietary Acoustic Calibration System (MCACC), which automatically calibrates your audio setup based on your room’s acoustics, optimizing sound quality for any environment. This feature, combined with its 192kHz/24-bit DACs, ensures that every note and nuance is rendered accurately.

In terms of connectivity, the VSX-521-K provides multiple HDMI inputs, allowing you to connect various devices like Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition video quality up to 1080p. Furthermore, it features an HDMI pass-through option, enabling the transmission of HD video signals even when the receiver is off.

For those who enjoy streaming music, this receiver supports various audio formats, and its USB input allows you to connect external devices easily. The front panel display is user-friendly, and navigation through the menu is intuitive, making it accessible for users of all levels.

The receiver is also designed with energy efficiency in mind, meeting energy-saving guidelines without sacrificing performance. Its sleek black finish and compact design ensure it integrates seamlessly into any entertainment setup.

Overall, the Pioneer VSX-521-K is a well-rounded AV receiver, offering exceptional audio quality, advanced features, and flexible connectivity options, making it a worthy addition to any home theater system. Whether you're watching movies or enjoying your favorite songs, this receiver is built to enhance your audio-visual experience in a substantial way.
Top Page Image Contents