Pioneer VSX-521-K operating instructions Other problems when using the Auto Mcacc setup

Page 20

03Basic Setup

7Wait for the test tones to finish.

A progress report is displayed on-screen while the receiver outputs test tones to determine the speakers present in your setup. Try to be as quiet as possible while it’s doing this.

1.Auto MCACC

Now Analyzing

Environment Check

Ambient Noise

Speaker YES/NO

Return

•For correct speaker settings, do not adjust the volume during the test tones.

8Confirm the speaker configuration.

The configuration shown on-screen should reflect the actual speakers you have.

1.Auto MCACC

Check!

Front

[

YES ]

Center

[

YES ]

Surr

[

YES ]

Surr. Back

[YESx2]

Subwoofer

[

YES ]

 

 

 

 

 

10:Next

 

 

OK

 

 

Return

•With error messages (such as Too much ambient noise) select RETRY after checking for ambient noise (see Other problems when using the Auto MCACC setup below).

If the speaker configuration displayed isn’t correct, use / to select the speaker and / to change the setting. When you’re finished, go to the next step.

If you see an error message (ERR) in the right side column, there may be a problem with the speaker connection. If selecting RETRY doesn’t fix the problem, turn off the power and check the speaker connections.

9Make sure ‘OK’ is selected, then press ENTER.

If the screen in step 7 is left untouched for 10 seconds and ENTER is not pressed in step 8, the Auto MCACC setup will start automatically as shown.

1.Auto MCACC

Now Analyzing

Surround Analyzing

Speaker System

Speaker Distance

Channel Level

Acoustic Cal EQ

Return

A progress report is displayed on-screen while the receiver outputs more test tones to determine the optimum receiver settings for channel level, speaker distance, and Acoustic Calibration EQ.

Again, try to be as quiet as possible while this is happening. It may take 1 to 3 minutes.

10The Auto MCACC setup has finished! You return to the System Setup menu.

The settings made in the Auto MCACC setup should give you excellent surround sound from your system, but it is also possible to adjust these settings manually using the System Setup menu (starting on page 30).

Note

•Depending on the characteristics of your room, sometimes identical speakers with cone sizes of around 12 cm (5 inches) will end up with different size settings. You can correct the setting manually using the Speaker Setting on page 30.

•The subwoofer distance setting may be farther than the actual distance from the listening position. This setting should be accurate (taking delay and room characteristics into account) and generally does not need to be changed.

Other problems when using the Auto MCACC setup

If the room environment is not optimal for the Auto MCACC setup (too much background noise, echo off the walls, obstacles blocking the speakers from the microphone) the final settings may be incorrect. Check for household appliances (air conditioner, fridge, fan, etc.), that may be affecting the environment and switch them off if necessary. If there are any instructions showing in the front panel display, please follow them.

•Some older TVs may interfere with the operation of the microphone. If this seems to be happening, switch off the TV when doing the Auto MCACC setup.

20

En

Page 19 Page 21
Image 20
Page 19 Page 21
Contents VSX-521-K Information to User Risk of Electric Shock Do not OpenThis Class B digital apparatus complies with Canadian Ices Important NoticeContents Flow of settings on the receiver Installing the receiverAutomatically setting up for surround sound Mcacc Before you startControls and displays ChapterFront panel Selects an input source0101 DisplayRemote control  Receiver12  Source Operating range of remote controlLoading the batteries Placing the speakers Connecting your equipmentHints on the speaker placement Connecting the speakers Bare wire connections0202 123About Hdmi Making cable connectionsHdmi cables About video outputs connection Analog audio cablesVideo cables Hdmi OUTSelect one Connecting a TV and playback componentsConnecting using Hdmi Connecting a satellite receiver or other digital set-top box Connecting your component with no Hdmi terminalUsing the component video jacks Component Video in 1 DVD Component Video in 2 DVR/BDRSee The Input Assign menu on page 32 for more on this HDD/DVD recorder, Blu-rayConnecting antennas Connecting other audio componentsConnecting optional Bluetooth Adapter Plugging in the receiver Connecting to the front panel audio mini jackUsing external antennas Basic Setup Canceling the demo displayAutomatically setting up for surround sound Mcacc 0303Other problems when using the Auto Mcacc setup Confirm the speaker configurationWait for the test tones to finish Make sure ‘OK’ is selected, then press EnterPlaying a source Basic playback0404 Tip Bluetooth Adapter for Wireless Enjoyment of MusicWireless music play Pairing blinks Remote control operationPress Adapter to switch the receiver to Adapter input Start playback of music contents stored in BluetoothSaving station presets Listening to station presetsNaming preset stations Listening to the radioChoosing the listening mode Listening mode is shown on the display on the front panelListening to your system 0505Using the Sound Retriever Using the Advanced surround ADV SurrUsing Stream Direct AUTO/ Auto Surround Listening with Acoustic Calibration EQBetter sound using Phase Control Using surround back channel processingSetting the Up Mix function Each press cycles through the options as followsSetting the Audio options Dual MONOdPress Return to confirm and exit the menu Midnight /LOUDNESS aSelect the audio input signal if necessary Making an audio or a video recordingTune to the radio station, load the CD, video, DVD etc Prepare the source you want to recordSystem Setup menu Using the System Setup menuManual speaker setup Manual SP SetupChannel Level 0606Crossover Network Default settings Input Assign menuSpeaker Distance Component-1DVD Component-2DVR DVR/BDRPre Out Setting Auto Power Down menuFL Demo Mode menu You return to the System Setup menuHdmi Setup Synchronized amp modePower synchronization with TV Automatic switching of inputs Control with Hdmi functionBefore using synchronization Power synchronization with TVSelect the ‘ARC’ setting you want 0707General TroubleshootingAdditional information Important information regarding the Hdmi connection 0808Hdmi Specifications Resetting the main unitCleaning the unit Safety of Your Ears is in Your Hands Set your volume control at a low settingLimitedwarranty Garantie USA/Aux Etats-Unis Canada/Aux Canada

VSX-521-K specifications

The Pioneer VSX-521-K is a versatile and high-performance AV receiver designed to enhance your home entertainment experience. This model stands out for its impressive array of features, delivering robust audio and video capabilities, making it an ideal choice for audiophiles and casual listeners alike.

One of the key characteristics of the VSX-521-K is its 5.1 channel surround sound capability, providing an immersive experience that draws you into your favorite movies and music. With a total power output of 100 watts per channel, it ensures clear and potent sound reproduction that can fill large rooms without distortion. This model supports various surround sound formats, including Dolby TrueHD and DTS-HD Master Audio, which offer high-definition audio that brings cinematic experiences to life.

The technology behind the VSX-521-K also includes advanced audio processing features. The receiver incorporates Pioneer's proprietary Acoustic Calibration System (MCACC), which automatically calibrates your audio setup based on your room’s acoustics, optimizing sound quality for any environment. This feature, combined with its 192kHz/24-bit DACs, ensures that every note and nuance is rendered accurately.

In terms of connectivity, the VSX-521-K provides multiple HDMI inputs, allowing you to connect various devices like Blu-ray players, gaming consoles, and streaming devices, all while maintaining high-definition video quality up to 1080p. Furthermore, it features an HDMI pass-through option, enabling the transmission of HD video signals even when the receiver is off.

For those who enjoy streaming music, this receiver supports various audio formats, and its USB input allows you to connect external devices easily. The front panel display is user-friendly, and navigation through the menu is intuitive, making it accessible for users of all levels.

The receiver is also designed with energy efficiency in mind, meeting energy-saving guidelines without sacrificing performance. Its sleek black finish and compact design ensure it integrates seamlessly into any entertainment setup.

Overall, the Pioneer VSX-521-K is a well-rounded AV receiver, offering exceptional audio quality, advanced features, and flexible connectivity options, making it a worthy addition to any home theater system. Whether you're watching movies or enjoying your favorite songs, this receiver is built to enhance your audio-visual experience in a substantial way.
Top Page Image Contents