Audio-Technica U853RWU, U853RU manual Architect’s and Engineer’s Specifications

Page 2

349

U853RU & U853RWU

Architect’s and Engineer’s Specifications

The microphone shall be a fixed-charge condenser designed for permanent installation or portable applications. It shall have a UniLine® (line cardioid) polar pattern with a uniform 90° angle of acceptance and a frequency response of 30 Hz to 20,000 Hz. It shall be capable of accepting optional interchangeable elements for additional polar patterns. The microphone shall operate from an external 11V to 52V DC phantom power source. It shall be capable of handling sound input levels up to 135 dB with a dynamic range of 115 dB. Nominal open-circuit output voltage shall be 17.7 mV at 1 V, 1 Pascal. Output shall be low impedance balanced (250 ohms). It shall offer outstanding rejection of radio frequency interference (RFI).

The microphone shall have a permanently attached 7.6 m (25') miniature cable terminating in a special TA3F-type output connector designed

to optimize RFI immunity. The output connector shall connect to a TB3M-type jack on the included power module. The power module shall contain a recessed switch to permit choice of flat response or 80 Hz low-frequency roll-off. The output of the power module shall be a 3-pin XLRM-type connector.

An adjustable steel wire hanger shall be provided for suspended installations. The steel wire hanger shall attach to the microphone body and allow for the positioning of the microphone without the need for tools. A two-stage foam windscreen and a 5/8"-27 stand adapter shall also be included.

The microphone shall be a hanging design, with an overall length of 156.0

mm(6.14") and a head diameter of 12.2 mm (0.48"). Weight shall be 30 grams (1.1 oz) without cable. The microphone, cable and steel hanger shall be black [white].

The Audio-Technica U853RU [U853RWU] is specified.

5.20"

132.0 mm

6.14" 156.0 mm

0.48" 12.2 mm

0.13" 3.2 mm

25' 7.6 m

Specifications

 

 

 

Element

Fixed-charge back plate, permanently

 

polarized condenser

Polar pattern

UniLine® (line cardioid)

Frequency response

30-20,000 Hz

Low frequency roll-off

80 Hz, 18 dB/octave

Open circuit sensitivity

–35 dB (17.7 mV) re 1V at 1 Pa

Impedance

250 ohms

Maximum input sound level

135 dB SPL, 1 kHz at 1% T.H.D.

Dynamic range (typical)

115 dB, 1 kHz at Max SPL

Signal-to-noise ratio1

74 dB, 1 kHz at 1 Pa

Phantom power requirements

11-52V DC, 2 mA typical

Switch

Flat, roll-off

Weight

Microphone: 30 g (1.1 oz)

 

Power module: 81 g (2.9 oz)

Dimensions

Microphone: 156.0 mm (6.14") long,

 

12.2 mm (0.48") diameter

 

Power module: 92.9 mm (3.66") long,

 

18.9 mm (0.74") diameter

Output connector

Power module: Integral 3-pin XLRM-type

Cable

7.6 m (25.0') long (permanently attached

 

to microphone), 3.2 mm (0.13") diameter,

 

2-conductor, shielded cable with TA3F-

 

type connector

Optional interchangeable elements

UE-O omnidirectional (360°)

 

UE-C cardioid (120°)

Audio-Technica case style

UE-H hypercardioid (100°)

M32

Accessories furnished

 

U853RU

AT8538 power module; AT8451 steel

 

hanger; AT8154 two-stage foam

 

windscreen; AT8438 5/8"-27 stand

U853RWU

adapter

AT8538 power module; AT8451(WH)

 

steel hanger; AT8154(WH) two-stage

 

foam windscreen; AT8438 5/8"-27 stand

 

adapter

In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

1Typical, A-weighted, using Audio Precision System One Specifications are subject to change without notice.

frequency response: 30–20,000 Hz

 

 

 

in dB

 

 

 

 

 

 

Response

10 dB

 

 

 

 

50

100

200

500

1k

2k

5k

10k

20k

 

 

 

Frequency in Hertz

 

 

 

LEGEND

 

12" or more on axis

 

 

 

 

 

 

Roll-off

 

 

 

 

 

 

polar pattern

 

 

 

 

 

 

330˚

30˚

 

 

 

 

 

 

 

 

 

 

 

 

300˚

 

 

 

60˚

 

 

 

 

270˚

 

 

 

90˚

 

 

 

 

240˚

 

 

 

120˚

 

 

 

 

 

 

 

 

LEGEND

 

 

 

 

 

 

 

 

 

210˚

 

150˚

 

 

200 Hz

 

 

180˚

 

 

1 kHz

 

 

 

 

 

 

 

5 kHz

 

 

SCALE IS 5 DECIBELS PER DIVISION

 

 

 

 

8 kHz

 

 

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

 

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

 

©2010 Audio-Technica U.S., Inc. audio-technica.com

0001-0160-01

Image 2
Contents Description FeaturesInstallation and Operation Architect’s and Engineer’s Specifications Specifications
Related manuals
Manual 1 pages 29.32 Kb

U853RU, U853RWU specifications

Audio-Technica is a name synonymous with high-quality audio equipment, and its U853RWU and U853RU models exemplify this commitment to excellence in sound reproduction. Designed primarily for professional applications, these condenser microphones are ideal for podiums, presentations, and theater performances, offering superior performance and versatility.

The Audio-Technica U853RWU is a boundary microphone that excels in capturing clear and natural sound. One of its standout features is the half-cardioid polar pattern, which effectively isolates sound sources while minimizing background noise. This feature is particularly beneficial in environments where multiple speakers are present, ensuring that the microphone captures only the desired audio.

Another significant aspect of the U853RWU is its innovative design, which incorporates a low-profile enclosure. This allows for discreet placement, making it an excellent choice for aesthetic-sensitive settings such as conference rooms and auditorium stages. Additionally, the U853RWU offers a wide frequency response range of 30 Hz to 20 kHz, providing exceptional detail and clarity across the audio spectrum.

Similarly, the U853RU model shares many features with the U853RWU but is tailored for different applications. It also boasts high sensitivity and low self-noise, making it suitable for capturing nuanced vocal performances and instrument sounds. Both microphones are equipped with a robust construction designed to endure the rigors of stage use, ensuring longevity.

Audio-Technica employs advanced technologies in the U853RWU and U853RU, including a high-quality internal acoustic windscreen that minimizes popping sounds from plosives, further enhancing audio clarity. The frequency response can be tailored using optional accessories, allowing users to customize the mic's performance to better suit specific needs.

In summary, the Audio-Technica U853RWU and U853RU are powerful tools for audio professionals seeking reliability and high-fidelity sound. With features like half-cardioid polar patterns, wide frequency response, and durable construction, these microphones are designed to meet the demands of both live performances and studio recordings. Whether used in corporate environments or artistic venues, these models are primed to deliver exceptional audio quality.