Technicolor - Thomson 608 1.1.1, Hardware Specifications, Physical interfaces, Memory and CPU

Chapter 1

Your SpeedTouch™

1.1.1	Hardware Specifications
Router Integrated multi-mode ADSL modem, supporting:
	ADSL over POTS for a SpeedTouch™ ADSL/POTS variant)
	ADSL over ISDN for a SpeedTouch™ ADSL/ISDN variant)
	ADSL/RE-ADLS2/ADSL2/ADSL2+ for both ADSL over POTS and ADSL over
	ISDN
Physical interfaces
	WAN:
	One RJ-11 port for ADSL/POTS or ADSL/ISDN connection
	Integrated ISDN Modem S0 interface (in case of a SpeedTouch™608 WL/
	620)
	LAN:
	Four RJ-45 ports for managed 10/100Base-T Half-/Full-duplex auto-
	sensing MDI/MDI-X Ethernet switch
	Wireless LAN: IEEE 802.11b/g Wi-Fi compliant access point on the
	SpeedTouch™608 WL/620
LEDs LED indicators for all interfaces

Reset button One programmable recessed reset button for restoring the factory default settings

Association button One push button for wireless association and registration on the

SpeedTouch™608 WL/620

Wireless performance On the SpeedTouch™608 WL/620:

	Typical indoor coverage: 60m
	Dynamic rate switching
	Manual / Automatic channel selection
	Manual / Automatic selection of pure 802.11g, pure 802.11b or mixed mode
	(802.11b/g) network
	Wireless Distribution System (WDS)
	WPA-PSK / WEP data encryption
Memory and CPU
	16 MB flash
	32 MB SDRAM
	Memory and processor load counters
Cardbus
	On SpeedTouch™608 WL/620:

PCMCIA/CardBus plug-in slot for future extension: IPSec acceleration card,

PSTN back-up card, GPRS back-up card, ..

Power requirement Power supply: 18V AC, 1000mA with patent-pending power-cord lock to avoid accidental power plug-out

E-DOC-CTC-20050429-0104 v1.0 5