Technicolor - Thomson 620, 605 5.4.4, Routed PPPoI, Availability, Introduction, Creating a Routed

Chapter 5

Expert Configuration

5.4.4	Routed PPPoI
Availability
	The ISDN modem is only fully functional after activating the ISDN software module
	with the ISDN software module activation key. For more information, see
	“5.2.10 Add-on” on page 122.
Introduction
	The Routed PPPoI configuration page allows you to add new Routed PPPoI
	connection entries or to change settings of existing entries.
Creating a Routed
	To add a Routed PPPoI connection entry:
PPPoI connection entry	1	Click New.
	2	In the Interface box, type a unique interface name.
	3	In the ISP profile list, click:
		The name of a profile if you want to use an existing profile.
		New to create a new profile. Type the name you want to assign to this
		profile in the Enter Name box.
		These ISP profile contain the ISDN parameters.
	4	Type user name and password for the account at the ISP.
	5	If needed, enter the ISDN parameters of your ISP.
	6	Click Apply.

Additional configuration Once created, per Routed PPPoI connection, additional configuration is possible by clicking:

1Routing

2Other

These parameters can only be modified when the link is down. Take the link down first by clicking Hang-up.

Routing Following fields are available:

Destination:

Controls the networks that can be reached via this particular PPP connection.

Specify the remote host or network in prefix notation. e.g. 172.16.0.0/16.

Label:

Allows you to assign a label to this connection.

142 E-DOC-CTC-20050429-0104 v1.0