Technicolor - Thomson 608 WL, 620, 605 manual 128

Chapter 5

Expert Configuration

Routing Rules The Routing Rules section provides an overview of the existing routing rules.

Proceed as follows to create a new rule:

1Click New to create a new rule.

2Fill in all the fields.

Index:

The index of the label rule.

Name:

The name of the rule.

Label:

The label allows to identify packets with matching criteria. If such a packet arrives it is “labelled” with a packet classification label. Still no packet classified routing is done. Only if you add a route that uses that particular label as route criterion, the effective classification based routing is applied.

Service:

The service or protocol. (e.g. smtp, http, telnet,...)

Source Interface:

The source interface. (e.g. _lan1, _wan1, _dmz1,...)

Source IP - Select:

The name of the source IP expression.

Destination IP - Select:

The name of the destination IP expression.

State:

Select this check box to enable this rule.

Log:

Select this check box to generate a syslog message when this label is being used.

3Click Apply.

IP QoS Rules The IP QoS Rules section provides an overview of the existing routing rules.

Proceed as follows to create a new rule:

1Click New to create a new rule.

2Fill in all the fields.

3Click Apply.

128 E-DOC-CTC-20050429-0104 v1.0