Technicolor - Thomson 620, 605, 608 WL 5.3.5 RIP, Chapter, Configuration Interfaces Neighbours

Chapter 5

Expert Configuration

5.3.5 RIP

Overview The RIP web page contains three tabs:

Configuration

Interfaces

Neighbours

Configuration The Configuration section allows you to enable/disable the SpeedTouch™ RIP functionality and configure the some basic RIP settings.

Interfaces The RIP Interfaces table allows you to configure interface specific RIP settings such as:

Override the master RIP status (enable/disable)

Override the master RIP version, separately for receiving and sending RIP messages

Specify whether authorization is needed or not, and if so the required authorization string

Specify whether routed must be included in RIP updates sent to a gateway from which the updates were learned

Specify whether the interface should transmit RIP updates or not.

Neighbours Optionally, the RIP Neighbours table allows you to define one or more RIP neighbours. This may be necessary in cases where multicast messages can not be sent or received among the network.

130 E-DOC-CTC-20050429-0104 v1.0