Technicolor - Thomson 608 WL 4.6.5, Access Point Settings, Accessing the Access, Point settings

Chapter 4

Basic Configuration

4.6.5	Access Point Settings
Accessing the Access
	Proceed as follows:
Point settings	1	On the left menu, click Office Network.
	2	Under Wireless, click the name of the Access Point you want to view or

configure.

The Access Points names are of the following format: “WLAN: “ +

Network Name, for example “WLAN: SpeedTouch123456”.

Overview The Overview page displays a brief overview of the current configuration.

Details The Details page displays a more detailed overview of the current configuration.

Configure Under Configuration following fields are available:

Interface Enabled:

Allows you to enable/disable the wireless interface.

Physical Address:

Displays the Base Service Set Identifier (BSSID) of the selected Access Point.

Network Name (SSID):

Allows you to change the network name of your WLAN.

Interface Type:

Allows you to choose between: 802.11b 802.11b(legacy)/g 802.11b/g

802.11g

Actual Speed:

Displays the current transmission speed.

Channel Selection:

Allows you to select a fixed channel or let the SpeedTouch™ automatically select a channel for you.

Region:

Displays your region.

Channel:

Displays the channel that is currently used by the Access Point.

Allow multicast from Broadband Network:

Allows you to allow/deny multicast messages from the Internet.

Large bandwidth streams like video streams, have a large impact on your wireless performance.

92 E-DOC-CTC-20050429-0104 v1.0