Technicolor - Thomson 620, 605, 608 WL manual System Information, If result is, Then, Chapter

Chapter 5

Expert Configuration

5.2.2 System Information

Overview The System Information page is the SpeedTouch™ expert start page. It consists of four sections:

Diagnostics

DSL Line Info

Configuration System

Diagnostics Select Diagnostics to view the results of the System Self Test, LAN connectivity and

DSL synchronisation test:

If result is...	Then ...
	the overall status of the particular item is healthy.
	an error situation has been detected for that item.

DSL Line Info Select DSL Line Info to view the current physical status of the ADSL line. The DSL Statistics allow you to view:

Line Status: this shows whether the DSL link is synchronised (Enabled) or not (Initialising).

Bandwidth Up/Down: the maximum available bandwidth of the DSL link in both up- and downstream direction.

Uptime: The duration of the current Enabled Line Status.

kBytes Tx/Rx: the amount of kilobytes (kBytes) sent (Tx) and received (Rx) since the establishment of the DSL link.

In addition, per configured Internet Service interface you van view:

The interface’s currently assigned or configured local WAN IP address

The interface’s currently assigned or configured primary (and secondary) DNS server IP address(es)

In case the negotiation of IP addresses failed, Unassigned or - is displayed for the applicable interface.

Configuration Select Configuration to view the configuration currently active on the SpeedTouch™. See “5.2.6 System Update” on page 112 for more information.

106 E-DOC-CTC-20050429-0104 v1.0