Technicolor - Thomson 608, 620 Interface Settings, Assigning a new IP address to the SpeedTouch

Chapter 4

Basic Configuration

4.6.8 Interface Settings

Overview The Overview page gives you an overview of the current interface settings.

Configure The Configure page allows you to:

Change the IP address settings of the SpeedTouch™. Change the DHCP IP address pool settings.

Before changing the DHCP pools, make sure that at least one IP

! address of the SpeedTouch™ uses the same subnet as the IP addresses in the DHCP pools.

Assigning a new IP address to the SpeedTouch™

Under IP Addresses:

1Type the IP address of your choice (for example 192.168.1.1) in the left text box.

2Type subnet mask in the right text box (for example 255.255.255.0).

3Click Add.

4Network devices using the same subnet mask can now access the SpeedTouch™ using this IP address.

E-DOC-CTC-20050429-0104 v1.0 97