Technicolor - Thomson 620, 605, 608 WL manual Chapter

Chapter 1

Your SpeedTouch™

FTP file transfer To allow correct file transfers, set the transfer mode to “binary”: At the ftp prompt, type bin and press Enter.

Turn on the hashing option to see the progression of the file transfer: At the ftp prompt type hash and press Enter.

Example:

/home/doejohn{1}$ftp 192.168.1.254 Connected to 192.168.1.254

220 Inactivity timer = 120 seconds. Use 'site idle <secs>' to change. Name (192.168.1.254:doejohn):

331SpeedTouch™ (00-90-D0-01-02-03) User 'doejohn' OK. Password requir

ed.

Password : ######

330OK

ftp>

ftp>bin

200TYPE is now 8-bit binary

ftp>

ftp>hash

200Hash mark printing on (8192 bytes/hash mark). ftp>cd dl

250Changed to /dl ftp>put C:\user.ini

200Connected to 192.168.1.10 port 1271

150Opening data connection for user.ini

226 File written successfully

ftp: 256 bytes sent in 0,000Seconds 256000,000Kbytes/sec. ftp>

Quote site command All the CLI commands can be executed from within an FTP session. Only complete CLI commands (in other words, the complete command syntax with all the parameters already specified) can be executed.

Example: To execute the CLI command :software cleanup: At the FTP prompt type ‘quote site software cleanup’ and press Enter.

ftp> quote site software cleanup 200-

200 CLI command "software cleanup" executed ftp>

For more information on CLI commands, see the CLI Reference Guide.

E-DOC-CTC-20050429-0104 v1.0 17