Technicolor - Thomson 620, 605, 608 WL Chapter, Select All Programs Accessories Command Prompt

Chapter 1

Your SpeedTouch™

Telnet session Proceed as follows:

1Open a telnet application.

You can use the Command Prompt window.

In Windows XP for instance:

1On the Windows task bar, click Start.

2Select (All) Programs > Accessories > Command Prompt.

2 Connect to your SpeedTouch™. .

In the Command Prompt window:

At the prompt, type telnet followed by the IP address of your SpeedTouch™ (default is 192.168.1.254).

3 Enter your SpeedTouch™ security user name and password.

The default user is ‘Administrator’ and the default password is blank.

4 As soon as you’ve opened a session to the CLI, the SpeedTouch™ banner is displayed, followed by the CLI prompt, as shown in the example below:

Username : Administrator

-----------------------------------------------------------------------

-

*

______

SpeedTouch

*

___/_____/\

*

/

/\\

Version 5.3

*

_____/__

/

\\

*

_/

/\_____/___ \

Copyright (c) 1999-2005,

*

//

/

\

/\ \

THOMSON

*

_______//_______/

\

/ _\/______

*

/

/ \

\

/

/ /

/\

*

__/

/

\

\ /

/ /

/ _\__

*

/ /

/

\_______\/

/ /

/ /

/\

* /_/______/___________________/ /________/ /___/

\

* \ \

\

___________

\ \

\ \

\

/

*

\_\

\

/

/\

\ \

\ \___\/

*

\

\/

/

\

\ \

\

/

*

\_____/

/

\

\ \________\/

*

/__________/

\

\

/

*

\

_____

\

/_____\/

*

\ /

/\

\

/___\/

*

/____/

\ \

/

*\ \ /___\/

*\____\/

-----------------------------------------------------------------------

{Administrator}=>

14 E-DOC-CTC-20050429-0104 v1.0