Extron electronic TSC 100 user manual Command/response table for SIS commands cont’d

Command/response table for SIS commands (cont’d)

3-6
	Command	ASCIICommand	Response		Additional description
		(host to TSC 100)	(TSC 100 to host)
TSC	Contrast (continued)
	Increment contrast value	+ ^	Con X7		Select the next higher contrast value.
100•
	Decrement contrast value	- ^	Con X7		Select the next lower contrast value.
Serial	View contrast value	^		X7	View the current contrast value setting.
	Brightness
Control	Specific value	X2 Y	Brt X2		Select brightness value X2 (0-255).
	Increment color value up	+ Y	Brt X2		Select the next higher brightness value.
	Decrement color value down	- Y	Brt X2		Select the next lower brightness value.
	View color value	Y		X2	View the current brightness value setting.
	Horizontal shift
	Specific value	X2 H	Hph X2		Sets horizontal centering to X2 (0-255).
	Increment	+ H	Hph X2		Shift right.
	Decrement	- H	Hph X2		Shift left.
	View	H	Hph X2		View the horizontal centering value.
	Vertical shift
	Specific value	X2 /	Vph	X2	Sets vertical centering to X2 (0-255).
	Increment	+ /	Vph X2		Shift right.
	Decrement	- /	Vph X2		Shift left.
	View	/	Vph X2		View the vertical centering value.
	Horizontal size
	Specific value	X2 :	Hsz	X2	Sets horizontal size to X2 (0-255).
	Increase size	+ :	Hsz	X2	Widen the picture.
	Decrease size	- :	Hsz X2		Make the picture narrower.
	View	:	Hsz X2		View the horizontal size value.

	Command	ASCIICommand	Response		Additional description
		(host to TSC 100)	(TSC 100 to host)
	Vertical size
	Specific value	X8 ;	Vsz	X8	Set the vertical size to X8 (0-210).
	Increase size	+ ;	Vsz	X8	Make the picture taller.
	Decrease size	- ;	Vsz	X8	Make the picture shorter.
	View	;	Vsz	X8	View the vertical size setting.
	Executive mode
	Enable executive	1X	Exe1		Lock the front panel. RS-232 adjustments only.
	Disable executive	0X	Exe0		Unlock the front panel.
	View status	X	X4		Show the executive mode status.
	Top blanking
TSC	Specific value	X3 (	Blt	X3	Set the number of lines to blank at the top of the
					picture.
100	Increase top value	+ (	Blt X3		Increase the number of top lines blanked.
	Decrease top value	- (	Blt X3		Decrease the number of top lines blanked.
•
Serial	View top value	(	Blt X3		View the number of lines blanked at top.
Control	Bottom blanking
	Specific value	X3 )	Blb	X3	Set number of lines to blank at the bottom of the
					picture.
	Increase top value	+ )	Blb X3		Increase the number of bottom lines blanked.
	Decrease top value	- )	Blb X3		Decrease the number of bottom lines blanked.
3-7	View top value	)	Blb X3		View the number of lines blanked at bottom.

Serial Control, cont’d