Audio-Technica ATW-U102X, ATW-U101X manual Specifications†, Optional Microphones and Cables

Specifications†
Overall System
UHF Operating Frequency
“x” systems	656.125-668.500 MHz
non-”x” systems	728.125-740.500 MHz
Number of Channels	100 total
Frequency Stability	±0.005%, Phase Lock Loop frequency
	control
Modulation Mode	FM
Normal Deviation	±10 kHz
Operating Range	300' typical (ATW-U102: 200' typical)
Operating Temperature Range	41° F (5° C) to 113° F (45° C)
Frequency Response	100 Hz to 15 kHz
ATW-R100(x) Receiver
Receiving System	Dual independent receivers, automatic
	switching diversity
Image Rejection	35 dB nominal
Signal-to-Noise Ratio	107 dB at 30 kHz deviation
	(IEC-weighted), maximum modulation
	75 kHz
Total Harmonic Distortion	<1% (10 kHz deviation at 1 kHz)
Sensitivity	26 dBmV, (S/N 60 dB at 5 kHz deviation,
	IEC-weighted)
Intermediate Frequency	45 MHz, 10.7 MHz
Audio Output (balanced)	31.6 mV (at 1 kHz, ±5 kHz deviation, 10k
	ohm load)
Output Connector	3-pin XLRM-type
Monitor Headphone Output	75 mW max. at 1 kHz, 1% T.H.D.,
(typical)	into 32 ohm (each channel) stereo
	headphones
Monitor Headphone Jack	3.5 mm TRS, signal on both Tip and Ring
External Power Requirements	12V DC nominal, 200 mA
Batteries	Two 9V (NEDA type 1604) alkaline, not
	included
Current Consumption	130 mA typical
Battery Life	Approximately 5-7 hours (depending on
	battery type and use pattern)
Dimensions	3.35" (85.0 mm) W x 4.53" ( 115.0 mm) H
	x 1.42" (36.0 mm) D
Net Weight (without batteries)	12.0 oz (340 grams)
Accessories Included	Two flexible UHF antennas; control
	screwdriver; mounting pouch; hook &
	loop fasteners

ATW-T101(x) Body-pack Transmitter

RF Power Output	10 mW typical
Spurious Emissions	Under federal regulations
Input Connector	TB5M
Line Input Impedance/Level	100k ohms/3.16V max. input at 1 kHz,
	1% T.H.D.
Battery	9V (NEDA type 1604) alkaline,
	not included
Current Consumption	50 mA typical
Battery Life	Approximately 7-9 hours (depending on
	battery type and use pattern)
Dimensions	2.52" (64.0 mm) W x 3.78" (96.0 mm) H
	x 0.91" (23.0 mm) D
Net Weight (without battery)	5.0 oz (143 grams)
Accessory Included	Control screwdriver
ATW-T102(x) Plug-on Transmitter
RF Power Output	10 mW typical
Spurious Emissions	Under federal regulations
Input Connector	3-pin XLRF-type
Battery	9V (NEDA type 1604) alkaline,
	not included
Current Consumption	60 mA typical
Battery Life	Approximately 7-9 hours (depending on
	battery type and use pattern)
Dimensions	1.58" (40.0 mm) W x 4.32" (109.8 mm) H
	x 1.58" (40.0 mm) D
Net Weight (without battery)	6.2 oz (177 grams)

†In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

Optional Microphones and Cables

AT831cT5 Miniature cardioid condenser microphone, terminated with a TA5F connector for use with the ATW-T101(x) transmitter. Includes clothing clip and windscreen.

MT830cT5 Subminiature omnidirectional condenser microphone, terminat- ed with a TA5F connector for use with the ATW-T101(x) transmitter. Includes clothing clip and windscreens.

MT830cT5-TH“Theater” model, same at MT830cT5 except beige color mic and cable for concealment.

AT8340 Input cable connects mics with 3-pin XLRM-type output to ATW-T101(x) body-pack transmitter. 4.3' (1.3 m), XLRF to TA5F connectors.

AT8341 Output cable connects ATW-R100(x) receiver to camera or other device. 19" (0.5 m), XLRF to right-angle 3.5 mm stereo mini-plug.

For future reference, please record your system information here.

Receiver	ATW-R100	Serial Number
	ATW-R100x	Serial Number
Transmitter	ATW-T101	Serial Number
	ATW-T101x	Serial Number
	ATW-T102	Serial Number
	ATW-T102x	Serial Number

8